Allicdata Part #: | BPH300YPV-ND |
Manufacturer Part#: |
BPH300YPV |
Price: | $ 64.79 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | REPLACEMENT MODULE 300V MCOV HYB |
More Detail: | N/A |
DataSheet: | BPH300YPV Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 58.89240 |
Series: | -- |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Voltage - Clamping: | -- |
Technology: | Fuse, MOV, TCO |
Number of Circuits: | 3 |
Applications: | General Purpose |
Mounting Type: | DIN Rail |
Package / Case: | Module |
Supplier Device Package: | Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The BPH300YPV is an electronic component of television signal systems, classified as a transient voltage suppressor (TVS), using a mix of technologies to protect a system from voltage transients. TVS devises intercept sudden, high voltage pulses and then divert the energy away from sensitive components and circuitry. The BPH300YPV will resist multiple transient events, but its ultimate life is dependent on the total energy in the transients.
The BPH300YPV is a unidirectional device with a typical breakdown rating of 330V. It features high surge capability with peak pulse power capability of 525W. This makes it highly effective in applications that need to provide protection from positive and negative transient events, such as when a device or system has multiple power sources. It did however, efficient in a single direction only which is from the anode (A) to the cathode (K).
This device acts as an electronic switch, when a voltage transient exceeds the breakdown rating of the device, the device turns on and conducts current. The current then flows from the anode to the cathode, forming a low impedance path to the grounded case which dissipates the energy harmlessly away from the protected motherboard.
The BPH300YPV also has an operating voltage of 30 volts, a leakage current of 0.2mA, and a stand-off voltage of 300 volts. The device is designed with a low reverse recovery time and an excellent clamping capability. The actual clamping voltage is determined by the type of transient that is encountered. Its clamping capability depends on the surge rating of the device and the external components that it is connected to.
The BPH300YPV is typically used in television signal systems to protect against transient voltages. Typical applications include automotive, industrial control, and consumer electronics applications. The device also can be employed to help protect against electrostatic discharge, lightning, and other power sources. It provides superior performance with a low voltage drop and high surge current capability.
The BPH300YPV is designed to act as a ‘last man standing’ in protection systems, shunting energy away from the sensitive electronic components. This device is enhanced by special features such as its broad bandwidth response, low capacitance ratings, and a wide variety of package options that make it suitable for many applications. The BPH300YPV is a reliable, cost-effective solution for transient voltage suppression.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BPH300YPV | Eaton | 64.79 $ | 1000 | REPLACEMENT MODULE 300V M... |
SURGE PROTECTION MODULE 34V
IC DIODE MODULE BOD 1.25A 1600V
IC DIODE MODULE BOD 1.25A 1500V
IC DIODE MODULE BOD 1.25A 1400V
IC DIODE MODULE BOD 1.25A 1300V
IC DIODE MODULE BOD 1.25A 1200V