Allicdata Part #: | BR5JB25L0-ND |
Manufacturer Part#: |
BR5JB25L0 |
Price: | $ 0.15 |
Product Category: | Resistors |
Manufacturer: | Stackpole Electronics Inc. |
Short Description: | RES CURR SENSE 0.025 OHM 5W 5% |
More Detail: | 25 mOhms ±5% 5W Through Hole Resistor Radial Curre... |
DataSheet: | BR5JB25L0 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.13396 |
Series: | BR |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 25 mOhms |
Tolerance: | ±5% |
Power (Watts): | 5W |
Composition: | Metal Foil |
Features: | Current Sense, Flame Proof, Non-Inductive, Pulse Withstanding, Safety |
Temperature Coefficient: | ±20ppm/°C |
Operating Temperature: | -65°C ~ 350°C |
Package / Case: | Radial |
Supplier Device Package: | -- |
Size / Dimension: | 0.800" L x 0.065" W (20.32mm x 1.65mm) |
Height - Seated (Max): | 1.000" (25.40mm) |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors
Through Hole Resistors, denoted by the BR5JB25L0 model, are components wired into a printed circuit board and commonly used in circuit boards for electronic control of such appliances as radio, television, and industrial motor drives. They come in various shapes, sizes, and capacitances depending on the application. These resistors have been used for a variety of purposes in a wide range of devices, from controlling the current flow in an electronic device to regulating the temperature of a heat sink.
The BR5JB25L0 model is made up of four components; the substrate, the resistor element, the wires, and the terminals. The substrate is a thin material that typically has one side coated with an oxidation-resistant metal, which helps in the contact and soldering process. The resistor element is where the resistance of the resistor is created. It is typically made up of carbon or metal depending on the application. The wire is what connects the substrate and the resistor element. The terminals are the contacts used to attach the resistor to the printed circuit board, allowing contact between different components of the circuit board.
These resistors’ main job is to control the current flow in a circuit board. This can be done by limiting the electrical resistance of the substrate, which will in turn control the current flow in a circuit. This is accomplished by manipulating the resistor’s value and the number of connections in the circuit board. The resistor can also be used for voltage regulation, filtering, and dampening of the electric signals. When used for these tasks, the resistance is designed to match the activity of the high and low frequency signals, allowing the circuit to function at its most reliable state.
As resistors are used in all types of electronic devices, understanding the proper method of installation is important. First, the resistors must be connected to the circuit board according to the manufacturer\'s instructions. Afterward, the resistor must be soldered into the substrate using a soldering iron and lead-free solder material. Finally, the resistor connector must be properly secured on the printed circuit board. All of these steps will help ensure a safe and reliable installation of the resistor.
Nowadays, surface mount resistors are more popular than through-hole technology. Through-hole resistors are still in use, primarily because they are suitable for applications that cannot make use of surface mount technology. Generally, a through-hole resistor can be smaller or bigger than a surface-mount resistor, as long as its terminal dimensions meet the minimum requirement for insertion. The size of the resistor will be determined by the application, and these resistors can come in a variety of sizes, including larger formats that are highly efficient and have low thermal resistance.
In conclusion, the BR5JB25L0 model through hole resistor is a common type of resistor used in many electronic devices. It is a component that is wired into a printed circuit board to provide resistance and help regulate current flow and voltage. This resistor is also used to filter and dampen electric signals so that the device works reliably. With proper installation, a through-hole resistor can be used in many applications with great success.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
BR5JB10L0 | Stackpole El... | 0.15 $ | 1000 | RES 0.01 OHM 5W 5% RADIAL... |
BR5JB15L0 | Stackpole El... | 0.15 $ | 1000 | RES 0.015 OHM 0.015 OHM 5... |
BR5JB20L0 | Stackpole El... | 0.15 $ | 1000 | RES 0.02 OHM 0.02 OHM 5W ... |
BR5JB25L0 | Stackpole El... | 0.15 $ | 1000 | RES CURR SENSE 0.025 OHM ... |
BR5JB50L0 | Stackpole El... | 0.15 $ | 1000 | RES 0.05 OHM 0.05 OHM 5W ... |
BR5JB5L00 | Stackpole El... | 0.16 $ | 1000 | RES 0.005 OHM 0.005 OHM 5... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...