BRL3225T470M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are components that represent one of the most fundamental components in a wide range of electronic circuits. Their applications span from providing a signal path for the electrical current to filtering out unwanted frequencies from a signal. The BRL3225T470M fixed inductor is an electrical component used to create and store magnetic fields by passing a current through it. It acts as an electrical coil and can be used for filtering, chokes, transformers, and other low frequency applications.

Construction

The BRL3225T470M is a surface-mount, four-wire inductor that consists of air-core ferrite windings, which are multi-layer nanocrystalline cores held in place with a four-wire bonding technique. It is mounted on a single sided, printed circuit board (PCB). The winding is wound around the core using a winder and is connected to a ground plane using the four wires. The inductor has a high current carrying capacity, low loss characteristics, and is suitable for high frequencies.

Working principle

The BRL3225T470M fixed inductor works by Direct Current (DC) flowing through the inductor to create a magnetic field around the component. When current is applied to the inductor, it creates an alternating magnetic field as the current makes a complete loop within the inductor. This alternating magnetic field induces a voltage in the inductor that is proportional to the rate of change of current. The impedance of the inductor is determined by the inductance and is equal to the ratio of the voltage induced in the inductor to the rate of change of current.

The most common uses of the BRL3225T470M fixed inductor is for filtering out unwanted frequencies from a signal. This is done by passing the signal through the inductor, where the higher frequencies are attenuated due to the inductance of the component. This is beneficial for applications such as radio receivers where unwanted frequencies can be filtered out from the signal in order to improve the overall signal quality.

The BRL3225T470M fixed inductor can also be used for power management. When used as part of a power management system, the inductor can act as a choke which is used to regulate and limit the overcurrent drawn through a particular circuit. This is beneficial as it prevents the current from exceeding the specified limits, thus preventing any damage to the component.

In addition to the above applications, the BRL3225T470M fixed inductor can also be used as part of a transformer circuit. This type of circuit is useful for applications such as power conversion or voltage regulation where the voltage in a circuit needs to be changed. By passing current through the inductor, the voltage across a circuit can be changed either by increasing or decreasing it depending on the direction and magnitude of the current.

Conclusion

The BRL3225T470M fixed inductor is a versatile component that can be used for many applications. It consists of air-core ferrite windings held in place with a four-wire bonding technique and is mounted on a single sided, printed circuit board (PCB). It has a high current carrying capacity and is suitable for high frequencies. It can be used for filtering, chokes, transformers, power management and voltage regulation applications. All of these features make the BRL3225T470M fixed inductor an ideal component for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference