BRT13H

Current - On State (It (RMS)) (Max):	300mA
Approvals:	CQC, UL
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 100°C
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.1V
Turn On Time:	--
Current - Hold (Ih):	500µA
Series:	--
Current - LED Trigger (Ift) (Max):	2mA
Static dV/dt (Min):	10kV/µs
Voltage - Off State:	800V
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<h3>BRT13H Application Field and Working Principle</h3><p>Optoisolators - Triac, SCR Output devices, such as the BRT13H, are used to isolate the control signal from the main controlled circuit, typically a power circuit, while still providing the necessary power to properly enable and control the circuit. This device is a high-quality four-terminal logic-level transistor output optoisolator with an internal photoresistor optically coupled to an integrated photo-transistor. It is CSA certified as suitable for use in information Technology equipment with a 105°C rating.</p><h4>Applications</h4><p>The BRT13H is typically used to provide an isolated switch drive for low-power, low-voltage on-off switching applications such as over-current protection, emergency light switching, industrial process control, power management, intelligent lighting control systems, as well as in telecommunications, consumer, and automotive applications.</p><h4>Working Principle</h4><p>The BRT13H works by transferring a current, in the form of a light emitting diode that is optically coupled to the phototransistor, to the phototransistor. This phototransistor then controls the switching of the output signal by illumination from the LED light. When the LED is not illuminated, the output is switched off so that no current is transferred to the controlled circuit. When the LED is illuminated, a current transfer occurs within the optoisolator in order to activate the phototransistor which, in turn, switches on the controlled circuit (and in this case, the power circuit) to allow the flow of current.</p><p>The BRT13H is a hassle-free solution when it comes to isolated switch drive applications. It offers a wide supply range, high polarization voltage, low saturation voltage, and outstanding dv/dt and di/dt capability as well as low power consumption, due to its integrated design. Its low drive current coupled with high-power semiconductor integrated circuits makes it ideal for most switch drive applications.</p><p>All in all, the BRT13H provides a reliable and economical optoisolator solution that offers minimum drive current with high-power device integrated circuits for switch drive applications in power management, intelligent lighting, and telecommunications, consumer, and automotive applications.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description