BS08D-112

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are electronic components made up of four layers of alternating p-type and n-type materials, commonly used in high power applications. The BS08D-112 is a thyristor that is especially useful in automotive and telecom applications. This article will discuss the application field and working principle of the BS08D-112.

The primary application of the BS08D-112 is in automotive and telecom applications. The BS08D-112 is a voltage triggered thyristor that offers fast operation and low trigger current. This makes it ideal for applications where high efficiency and low power consumption are important. The BS08D-112 can be used to regulate the power supplied to motors, so that they don’t draw more power than needed. It can also be used to prevent inductive kickback in inductive loads, thereby preventing damages to the system. In telecom applications, the BS08D-112 can be used to regulate and protect telephone lines from over-voltage, over-current and short-circuit conditions.

The BS08D-112 is a device formed by the combination of a Diode-connected A Controlled Switch (DIAC) with a Silicon-controlled Rectifier (SCR). A DIAC is a bidirectional switch that can be used to control the flow of current in both directions. It consists of two PN junction diodes connected anode to cathode. The SCR is a three-terminal device, consisting of three layers of alternating P and N type materials. It can be switched on by applying a voltage to the gate terminal. When the SCR is on, current can be allowed to flow through the device.

The BS08D-112 uses an SCR as the main switching element and a DIAC as the trigger device. The DIAC is connected to the gate terminal of the SCR, and the anode is connected to the positive voltage source. When a triggering voltage is applied to the DIAC, it starts conducting, allowing current to flow through the SCR gate. As a result, the SCR turns on, allowing current to flow through the device. The BS08D-112 can be triggered by any voltage above its specified breakover voltage, usually in the range of 7-10 volts.

The BS08D-112 is an ideal choice for applications where fast response, low power consumption and reliability are required. Its DIAC-SCR combination allows for fast turn-on times and low trigger current, making it ideal for automotive and telecom applications. In addition, its wide operating temperature range makes it suitable for use in harsh environments. The BS08D-112 provides a reliable, cost-effective, and easy to use solution for automotive and telecom applications.

The specific data is subject to PDF, and the above content is for reference