BTS426L1 E3043

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	BTS426L1
Supplier Device Package:	P-TO220-5
Package / Case:	TO-220-5
Operating Temperature:	-40°C ~ 150°C (TJ)
Fault Protection:	Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Features:	Auto Restart, Status Flag
Input Type:	Non-Inverting
Rds On (Typ):	50 mOhm
Current - Output (Max):	5.8A
Series:	PROFET®
Voltage - Load:	5 V ~ 34 V
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC - Power Distribution Switches, Load Drivers The BTS426L1 E3043 is a smart, low-side MOSFET switch with integrated load drivers. It is a power device used with chip-level applications such as DC-DC buck converters and motor drivers. The E3043 is designed to offer low resistance, high operating temperature limits and improved EMI performance. The BTS426L1 E3043 is a four-channel load switch that combines an integrated gate driver and two MOSFETs with two ESD protection diodes in the same package. It features one low-side and one high-side MOSFET with a current rating of up to 100 mA, and an input pull-up/down to enable/disable the outputs in a simple way. The gate driver is designed for a voltage range of up to 25V.The BTS426L1 E3043 is designed for high integration, improved EMI, and operating temperature limits up to 175°C. The device\'s low rDS(on) ensures minimal power losses during switch transitions, while the integrated ESD protection diodes offer a robust protection circuit. It has a typical current limit of approximately 150mΩ that allows higher robustness and better handling behavior during over current conditions or short circuits. In terms of application fields, the BTS426L1 E3043 is suitable for use in DC-DC buck converters, motor drivers, battery protection applications, load switching in industrial and automotive applications, power management in computers and communication systems, and in general, in any application where high-efficiency, low-power loss and high-temperature failure are required. The working principle of the BTS426L1 E3043 is based on the integrated four-channel MOSFET and integrated gate driver which provides a high-speed switching operation. The top MOSFET acts as a high-side switch, allowing currents to flow from the input node to the load, while the bottom MOSFET acts as a low-side switch and disconnects the load from the input node when switched off. The integrated gate drive allows for a fast and efficient switch operation, the switch off time being controlled by the input pin configurations. The package of the BTS426L1 E3043 is designed to offer a high level of isolation for the MOSFETs, preventing any source of failure due to heat, external noise, and/or electrical interference. The integrated ESD protection diodes also provide an improved level of protection in order to ensure a robust design. In terms of safety, the device includes two ESD protection diodes to prevent any damage due to electrostatic discharge. All in all, the BTS426L1 E3043 is a simple, cost-effective solution for DC-DC buck converters, motor drivers, battery protection applications, load switching, or any other power management application requiring high-efficiency, robustness and low-power losses. The device\'s low resistance, high operating temperature limits and improved EMI performance, combined with integrated ESD protection diodes, makes it ideal for any application requiring high-performance switching and power management.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description