BZD27C13P M2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BZD27C13P M2G is an voltage regulator diode, also known as a Zener Diode, whose purpose is to regulate the voltage within an electrical system. When the voltage in the system rises above a predetermined level, it will begin to reverse-bias, and the voltage will remain at the Zener voltage (Vz) as determined by the manufacturer. This diode is typically used in electronic circuits, such as those found in audio equipment, to regulate the signal voltage and ensure the correct voltage levels are supplied to the correct circuits.

This diode is a single diode, meaning it is made up of only one p–n junction. It is also known as a single-pole, single throw (SPST) switch. The single diode is two-terminal device with one positive anode and one negative cathode. The diode is avaluable in a variety of packages including TO-220, TO-263, and TO-243. The BZD2C13P M2G also offers a wide operating temperature range from -55°C to +150°C.

This diode is ideal for applications where a low-power voltage regulator is needed. It is also a good choice for devices that require a low power start-up, such as in power supplies that must be turned off and on. It can also be used to control the output of analog circuits and maintain a set voltage output. A resistor between the diode\'s anode and the input of the circuit can be used to limit the maximum current through the diode and allow the diode to regulate the voltage.

The BZD27C13P M2G is a voltage regulator diode with a breakdown voltage of 13V. It has a low leakage current and a high breakdown voltage, making it suitable for use in most voltage-regulation applications. The diode has a low forward voltage, meaning the voltage drop across the diode is minimal. This ensures that the diode is able to pass the required amount of current through the circuit. This diode also has a low thermal resistance, meaning that it can dissipate heat quickly, prolonging the life of the diode.

The working principle of the BZD27C13P M2G is that when the voltage across the diode (Vd) reaches a predetermined level, the diode begins to reverse-bias and maintain a voltage equal to the Zener voltage. This creates a low-power voltage regulator, which ensures that the voltage within the circuit remains stable and within the specified range. This helps to prevent the circuit from being damaged by high voltages. The diode also acts as a switch, opening and closing when the voltage across it changes.

Overall, the BZD27C13P M2G is an ideal voltage regulator diode for many applications. The diode has a low breakdown voltage, allowing it to regulate the voltage within a circuit. The diode has a low forward voltage, meaning the voltage drop across it is minimal, and it has a low thermal resistance, which allows it to dissipate heat quickly and prolong the life of the diode. The diode also works as a switch, opening and closing when the voltage across it changes. All of these qualities make the BZD27C13P M2G an ideal choice for applications where a low-power voltage regulator is needed.

The specific data is subject to PDF, and the above content is for reference