BZD27C200P-HE3-08

Series:	Automotive, AEC-Q101, BZD27C
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	200V
Tolerance:	--
Power - Max:	800mW
Impedance (Max) (Zzt):	500 Ohms
Current - Reverse Leakage @ Vr:	1µA @ 150V
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 200mA
Operating Temperature:	-65°C ~ 175°C
Mounting Type:	Surface Mount
Package / Case:	DO-219AB
Supplier Device Package:	DO-219AB (SMF)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction to BZD27C200P-HE3-08

The BZD27C200P-HE3-08 is a type of single Zener diode that is used for various applications in the electronics industry. It has a power rating of 200mW, a maximum reverse voltage of 27 Volt, and a junction temperature rating of 150°C. The device also has a reverse current at a maximum of 150mA.

Applications of BZD27C200P-HE3-08

BZD27C200P-HE3-08 is used in various applications related to controlling the flow of electrical current. It is commonly used in voltage regulation circuits where the device ensures that voltage across the circuit is maintained within tolerable levels.In addition to this, it can be used in wave shaping circuits, such as those that are used in the generation of digital and analog signals, to control the amplitude of the output waveform. It helps in the elimination of noise, ripples and other disturbances in the output waveform.The BZD27C200P-HE3-08 is also used in the protection of logic circuits, where an excessively large input or output current is limited by the device, and thus spiking currents don’t cause any damage.

Working Principle of BZD27C200P-HE3-08

The BZD27C200P-HE3-08 works on the principle of a Zener break down. In this phenomenon, when the current is increased beyond a certain level and the voltage across the device is raised above its reverse voltage, the current breaks-down due to the electric field created in the PN junction. This is known as a Zener effect and can be used for voltage regulation.When the device is connected in a circuit, the reverse voltage determines the breakdown voltage, which decides the level of output voltage. This is because the Zener diode will only allow current to pass when the voltage across the diode is greater than the Zener voltage. When the voltage is dropped below the Zener voltage, the current flow through the diode is stopped.

Conclusion

The BZD27C200P-HE3-08 is a single Zener diode which has various applications in the electronics industry. It is mainly used for voltage regulation, wave shaping, and protection of logic circuits. It works on the principle of breakdown of current at higher voltage. This phenomenon ensures that the output is not affected by the external environment, thus providing more reliable and consistent results.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description