BZG05B15-M3-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A BZG05B15-M3-18 diode belongs to the single Zener diode category and is designed for use with an integrated circuit on a printed circuit board. Zener diodes are essential components in many circuits, as they are useful for providing protection against potential damages due to high voltage levels. The BZG05B15-M3-18 is equipped with an optimized wafer design and optically isolated package. This diode is specifically designed for low-power usage, and its power handling capacity is 300 mW.

The principle behind the operation of the BZG05B15-M3-18 diode is based on the use of the reverse breakdown voltage of the p-n junction. When a positive voltage from the anode is applied to the cathode, the breakdown voltage is reached and the electrical current begins flowing from the anode to the cathode. This flow is then limited to the maximum current allowable by the design of the diode.

The application field for the BZG05B15-M3-18 diode is quite varied, as it can be used in a wide range of circuits. One of the most common applications is in over-voltage protection of circuits. The diode protects against potential damage to the circuit due to high voltage levels by allowing a certain amount of current flow to pass through the diode in the event of an over-voltage situation.

The BZG05B15-M3-18 diode can also be used in power supplies. A diode is required at the output of the power supply to provide protection against potential short circuits. The diode acts as a safety device, allowing the voltage to drop to a safe level while preventing any current from entering the circuit in the event of a short circuit.

The BZG05B15-M3-18 diode can also be used for voltage scaling circuits. This diode can be used to reduce the input voltage of a circuit to a suitable level for the operation of the circuit. This can be done by connecting the diode in series with a resistor and scaling the voltage according to the Diode’s breakdown voltage.

The BZG05B15-M3-18 diode is also used in detector circuits. These circuits are used to detect signals with a high input voltage, and the diode can be used to limit the amount of current that passes through the detector circuit while still allowing the signal to be detected.

The BZG05B15-M3-18 diode can also be used in switching circuits for semiconductor devices. In this application, the diode is used to protect the device from any potential over-voltage conditions. The diode limits the current that can flow through the circuit, depending on the breakdown voltage, and thereby protects the device from any damage.

The BZG05B15-M3-18 diode is an essential component in many circuits as it can provide essential protection against potential damage due to high voltage levels. With its optimized wafer design and optically isolated package, the diode can serve a wide range of applications, including over-voltage protection, power supply protection, voltage scaling, and switching circuits.

The specific data is subject to PDF, and the above content is for reference