BZX384-C43,115

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A single Zener diode or a BZX384-C43,115 is a type of semiconductor device commonly used in electronics, allowing current to flow in the forward direction and reverse direction. It is mainly used to provide a reference voltage and protect the circuit from exceeding a certain voltage level.

Single Zener diodes are unidirectional, meaning electricity will only flow through it one way, either forward or reverse. The BZX384-C43,115 is designed to work off of a voltage drop of approximately 5.6V. Its maximum power dissipation is 500mW and its maximum reverse voltage is 5.6V. The range of the zener current varies from 10mA to 100mA, and the nominal zener diode impedance is low, generally in the range of 0.5 to 5 ohms. It is also known for having low voltage noise generation level.

The BZX384-C43,115 diode has a variety of applications. It can be used as a voltage reference source, especially when accuracy and stability are needed. This is because of the reliable and temperature-stable operation. It is also often used to prevent reverse current in circuits, as it provides a protection route for the current.

The BZX384-C43,115 is also commonly used in clamping circuits. It can be used with other components to reduce transient voltages and suddenly increase voltages. A clamping circuit basically incorporates a diode and a resistor and acts as an active element when the voltage attempts to move outside of a certain range.

The working principle of the BZX384-C43,115 is simple. In the forward direction, the diode acts like a closed switch, allowing the current to flow as long as the voltage across the diode does not exceed a certain predetermined value. When the voltage does exceed this value, the diode will start to conduct a small amount of current even in the forward direction.

When the voltage is higher in the reverse direction than in the forward direction, the diode will not act as a closed switch and will start to conduct a significant current, the amount which depends on the applied voltage. This current is usually referred to as the Zener breakdown current. It will remain almost constant over a wide range of voltages on the reverse side, before reaching a maximum.

The BZX384-C43,115 diode is used in many applications to provide a reference voltage. It is an important component in many circuits, aiding to reduce transient voltages and provide a reliable protection to the connected circuitry. It is a small, simple component that can have a big impact.

The specific data is subject to PDF, and the above content is for reference