BZX79-B11,113

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Voltage - Zener (Nom) (Vz):	11V
Tolerance:	±2%
Power - Max:	400mW
Impedance (Max) (Zzt):	20 Ohms
Current - Reverse Leakage @ Vr:	100nA @ 8V
Voltage - Forward (Vf) (Max) @ If:	900mV @ 10mA
Operating Temperature:	-65°C ~ 200°C
Mounting Type:	Through Hole
Package / Case:	DO-204AH, DO-35, Axial
Supplier Device Package:	ALF2
Base Part Number:	BZX79B11

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BZX79-B11,113 is a single Zener diode from Vishay with reverse voltage of 11.0 V to 11.3 V. It is designed for use as a shunt regulator to provide voltage regulation with minimum device power loss.The BZX79-B11,113 is manufactured with a NPN silicon epitaxial planar structure for maximum stability and is designed for operation in ambient temperatures from -55°C to +125°C. The diode has an ample power rating of 500 mW, a maximum clamping voltage of 19.5 V, and a maximum reverse leakage current of 1μA at 10V.The features offered by the simple BZX79-B11,113 consist of robust design, better performance, improved power dissipation and a lower give-away cost. The diode is ideally suited for use in applications such as linear regulation, Zener voltage stabilization, isolations, and clipping circuits.The BZX79-B11,113 is one of the most reliable Zener diodes available. It has a V-I characteristic curve in which the voltage remains flat as long as the current does not exceed the zener breakdown voltage. This ensures that the output voltage is tightly regulated even if the incident current changes drastically. It is designed for use as a voltage reference for linear regulators typically in consumer electronics, power supplies, and voltage stabilizers.The BZX79-B11,113 can also be used for clamping situations where it’s desirable to protect circuits from very high voltage signals. It can be used to create clipping circuits, where it’s desirable to limit the peak of a waveform while still passing much of its energy. A single Zener diode of this type can also be used as a voltage limiter to protect circuits from damaging effects of over voltage.The BZX79-B11,113 can be used as a temperature-independent rectifier to convert alternating currents into direct current, used in various devices such as power converters, audio amplifiers, and rectification.The working principle of the BZX79-B11,113 is quite simple. It consists of an anode and a cathode separated by a heavily doped semiconductor material. When the applied voltage is greater than the breakdown voltage, the diode begins to conduct current, and continues to conduct until the voltage is reduced.When the Zener diode is operated with the reversed bias, power is generated when electrons cross the junction and come into contact with the holes on the other side of the diode. This power is dissipated through the diode as heat and the flow of electrons creates a potential difference between the anode and cathode, effectively regulating the output voltage of the circuit.The main advantage of using a BZX79-B11,113 Zener diode is that it can be used in a wide variety of conditions. It is highly resistant to surge, temperature and vibration, and its minimum device power loss is an important factor in its cost-effectiveness.In conclusion, the BZX79-B11,113 is a single Zener diode from Vishay which has a reverse voltage of 11.0 V to 11.3 V and is suitable for applications such as linear regulation, Zener voltage stabilization, and clamping circuits. It features reliable design and good performance. The diode works on the principle of electron flow across the junction, creating a potential difference between the anode and cathode and regulating the output voltage. The diode has several characteristics that make it an attractive choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description