BZX79-B6V2,113

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of electrical component with two terminals that conduct electricity in only one direction. Zener diodes are a type of diode that allow current to flow in both directions but, when the voltage across the terminals exceeds a certain level known as the “Zener voltage”, the reverse current increases exponentially. The BZX79-B6V2,113 is a single Zener diode that is designed to be used in a series with other components in circuits that require a stable and reliable voltage.

In a basic circuit, the BZX79-B6V2,113 is connected between two power sources, such as a battery and the load, a transistor, or another component. The power source is usually higher voltage than the load, and this determines the Zener voltage of the diode. In this circuit, the current will flow through the diode and the series resistor, and any increase in the voltage across the diode over the Zener voltage will cause the diode to increase its reverse current, causing a relatively constant voltage to be maintained across the load.

The BZX79-B6V2,113 is commonly used to regulate the output voltage of power supplies and is especially useful in applications where a high input voltage needs to be reduced. By connecting the diode between the power source and the load, the voltage across the load will remain on or very close to the Zener voltage regardless of changes in the input voltage. This makes the diode an efficient and reliable way to regulate the voltage at the output.

The BZX79-B6V2,113 is also used in other applications where a stable voltage source is required. This could include radio receivers and transmitters, digital and analog computers, telephones, and other electronic devices. The diode is also used in circuits to protect components from overvoltage or to protect the device itself.

The BZX79-B6V2,113 is constructed of silicon, has a rated forward current of 500 mA, and a reverse-voltage rating of 6V. It has a Zener voltage rating of 6.6V and a capacitance of 200 pF. The diode’s maximum power dissipation is 2 W and it has a breakdown voltage of 6.2 V.

When the BZX79-B6V2,113 is connected in series with a load and power source, it allows current to flow in both directions, and regulates the voltage across the load. This makes it an effective and reliable way to regulate the output of power supplies and protect components and devices from overvoltage. The BZX79-B6V2,113 is widely used in many electronic applications and is a reliable and efficient way to maintain a constant voltage when used properly.

The specific data is subject to PDF, and the above content is for reference