C0603C-5N60G1T4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a type of electrical component used extensively in electronic circuits. They are typically composed of a coil of copper wire with an iron core. The iron core is usually made from a ferromagnetic material, such as ferrite. The inductance of fixed inductors is usually very low, but they are still used in many circuits that require a stable and low-frequency inductor.

C0603C-5N60G1T4 is one type of fixed Inductor. This fixed Inductor has a size of just 0.063" x 0.032" and a maximum inductance of 5mH. It has a low saturation current and low internal resistance which makes it suitable for high current applications. The C0603C-5N60G1T4 Inductor is typically used in DC-DC converters, switch-mode power supplies, switch-mode regulators, and other low-power sensitive circuit applications.

The C0603C-5N60G1T4 Inductor works on the principle of an electric field surrounding the inductor. As current passes through the inductor, a magnetic field is produced around it. This field induces a voltage across the terminals of the inductor, which is proportional to the rate of change of the current through it. The inductor is therefore capable of storing energy in a magnetic field, and releasing it again when the current flow changes.

The C0603C-5N60G1T4 Inductor also has several applications. It is commonly used in power supplies and DC-DC converters, as well as in RF circuits, low-noise amplifiers, and signal conditioning circuits. It is also used in audio applications, such as for filtering the signal and eliminating noise. Additionally, C0603C-5N60G1T4 Inductors can be used to reduce the input voltage ripple in power supplies, thus increasing the efficiency of the circuit.

In summary, the C0603C-5N60G1T4 Inductor is a type of fixed Inductor with a small size and low saturation current. It is typically used in DC-DC converters, switch-mode power supplies, switch-mode regulators, RF circuits, and other low-power, sensitive circuit applications. The inductor works on the principle of an electric field surrounding it, which induces a voltage across the terminals of the inductor when current passes through it. This voltage is then used to store energy in a magnetic field, and release it again when the current flow changes.

The specific data is subject to PDF, and the above content is for reference