C2327J5003AHF RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A directional coupler is a specialized radio-frequency (RF) device that can be used to measure the power of a transmitted signal. An RF directional coupler, such as C2327J5003AHF, is commonly used for RF radio systems, such as cellular telephones, wireless networks, and satellite communications. A directional coupler is a four-port device that consists of two input ports, one output port, and one coupled port. The input ports are used to connect to the transmitter and the output port is used to connect to the receiver. The coupled port is used to connect the transmitter and receiver together, so that the power of the transmitted signal can be measured.

C2327J5003AHF is a high-powered, dual-band directional RF coupler. It has a frequency range of 800-960 MHz and 1710-2170 MHz. It has an insertion loss of 0 dB and a VSWR of 1.5:1. Its coupling factor is 10 dB.

The working principle of an RF directional coupler is based on the fact that when a signal is propagated on a transmission line, part of the signal will travel in both directions on the line. This is known as a reflection. The RF coupler will measure the amplitude of the reflection. The directional coupler has two ports that measure the forward power and the reflected power at the same time. By knowing the amplitude of the forward and reflected power, the total power of the signal can be calculated.

C2327J5003AHF is a high-power, dual-band RF directional coupler. It is primarily used in extreme high-power applications, such as cell phone transmission towers and satellite communication systems. It is also used in measurement and monitoring of high-power radio transmissions, such as broadcast and military radio systems.

The C2327J5003AHF is an important device for radio systems. It can be used to measure the power of a radio transmission. It is also used in extreme high-power applications, such as cell phone transmission towers and satellite communication systems. The directional coupler is used to measure the forward power and the reflected power of a signal, allowing for the total power to be determined.

The specific data is subject to PDF, and the above content is for reference