C2O

Series:	--
Part Status:	Active
Function:	Switch
Modulation or Protocol:	GPRS, GSM
Frequency:	--
Applications:	Access Control Systems
Interface:	Screw Terminals
Sensitivity:	--
Power - Output:	--
Data Rate (Max):	--
Features:	LED Indicator
Voltage - Supply:	12V or 24V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Receiver, Transmitter, and Transceiver Finished Units

C2O, an abbreviation for Cold Control and Operate Systems, is a type of RF based system used in the-field application. It consists of an RF transmitter, receiver, and transceiver making use of unlicensed radio frequencies (UHF/VHF). The system\'s working principle is that its nodes (i.e. transmitter, receiver, and transceiver) are capable of sending and receiving digital signals, which are then converted into analog signals. These analog signals are then sent to a remote station, where they are converted back to digital signal. The station then uses this digital signal to relay commands to the nodes. This entire process is called wireless data transmission, and it allows C2O to operate without any physical connection.The RF transmitter is used to send out digital data. It is usually made up of signal transmiter, modulator, and an antenna. The signal transmmiter converts the digital data into radio frequency signals. The modulator modulates the radio signals and amplifies them. The antenna then transmits the signals towards the receiver.The RF receiver on the other hand, is used to capture the transmitted signals from the transmitter. It is usually made up of antenna, tuner, and demodulator. The antenna receives the signals and passes it on to the tuner. The tuner then tunes the signals to the right frequency and passes them on to the demodulator. The demodulator then converts the signals back to digital data which can be understood by the remote station. The RF transceiver is a combination of both the transmitter and receiver. It is a dual-mode device which can both receive and trasnmit signals. It is usually made up of two antennas, two signal transmmitters/receivers, and a single modulator/demodulator. The two antennas receive and transmit signals simultaneously, while the two signal transmmitters/receivers convert the data to digital and analog signals. The modulator/demodulator then modulates/demodulates the signals, thus allowing the transmitted signals to be received by the remote station, and vice versa. C2O is a very useful system for field applications as the nodes can be deployed in remote places, allowing for remote operation. Its ability to use unlicensed radio frequencies gives it greater control to send and receive data. The RF receiver, transmitter, and transceiver are essential components of the C2O system, as they convert data from digital to analog and back, enabling remote data transmission. All this makes C2O a useful finished unit in the field.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description