C2P0408N-A

Actuator Type:	Flatted (3.17mm Dia)
Operating Force:	--
Panel Cutout Dimensions:	Circular - 6.76mm Dia
Depth Behind Panel:	45.24mm
Features:	--
Termination Style:	PC Pin
Mounting Type:	Panel Mount, Through Hole, Right Angle
Contact Finish:	Silver
Contact Material:	Brass
Angle of Throw:	30°
Actuator Length:	9.52mm
Series:	C2
Voltage Rating - DC:	28V
Voltage Rating - AC:	125V
Current Rating:	100mA (AC), 250mA (DC)
Contact Timing:	Non-Shorting (BBM)
Circuit per Deck:	SP8T
Number of Poles per Deck:	1
Number of Decks:	4
Index Stops:	Adjustable
Number of Positions:	2 ~ 8
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

C2P0408N-A Application Field and Working Principle The C2P0408N-A rotary switch is a single-pole, double-throw switch designed for use in AC/DC circuits applications. This type of switch is ideal for making temporary or semi-permanent connections, depending on the application. This particular switch comes with a knob, so it can be easily manipulated.The construction of the C2P0408N-A rotary switch is very simple. It consists of a spindle, a switch housing, and four contact arms. The spindle is connected to the knob and is used to rotate the contact arms. The contact arms are connected to the switch housing and the terminals of the circuit board, and they open and close the circuit as the switch is turned.The C2P0408N-A is suitable for use in a variety of applications, including AC/DC circuits, motors, and lighting fixtures. This type of switch is also commonly used in lighting and HVAC controls, where it is necessary to make temporary connections. It can also be used to replace broken switches on other circuits.The C2P0408N-A is a non-polarized switch, meaning that it is not affected by the polarity of the circuit. The current rating of the switch is 6A/125V and 3A/250V AC or DC. The switch also offers protection against accidental contact as it has been designed with a safety mechanism. The C2P0408N-A is available in two mounting styles, surface mount and through-hole mount. Surface mounting requires attaching the switch to the circuit board with screws or solder, while through-hole mounting requires hole-drilling and the use of standoffs to provide electrical insulation and secure the switch to the board.When installing the C2P0408N-A it is important to ensure that the wire is of the correct size and type for the application. The correct size wire will prevent the switch from overheating and provide the necessary protection for the circuit. The switch should also be secured to the circuit board with screws or adhesive so that it does not come loose over time.The C2P0408N-A is typically used in applications where a temporary connection is needed, such as lighting, motor start and stop, and other AC/DC circuits. This type of switch is reliable, cost-effective and easy to install. With its simple construction and safety capabilities, the C2P0408N-A is an excellent choice for any application requiring reliable, safe switching.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description