C3EES-2018G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Cable Assemblies have been in use since the early days of general wiring when surface mount components were first used in residential and commercial construction. The C3EES-2018G, or rectangular power connector, is used to connect electrical devices such as motors, alternators, and generators, and to route power and signal connections. C3EES-2018G connectors are typically constructed from metal and are designed to withstand thermal, mechanical, and electrical shock. The C3EES-2018G provides a secure and reliable connection between power sources and equipment.

The C3EES-2018G is widely used in the automotive industry for industrial applications and is certified by the National Electrical Manufacturers Association (NEMA). The connectors are typically made from stainless steel and have a unique, secure shape that ensures a reliable connection. The shape of the connector provides a greater contact area, allowing for increased current and voltage ratings.

The C3EES-2018G is a two-piece connector. The first is a male plug, which is inserted into the corresponding female receptacle. The second is an electric contact plate, which is mounted onto the plug. The contact plate is designed to provide a secure connection between the plug and receptacle, and it is this plate that allows the current to pass through.

The contact plate also helps to provide a shield against excessive electrical interference from external sources, such as electromagnetic radiation from cell phones and other electronic devices. The plate is insulated from the rest of the connector, helping to prevent heat from transferring between the two pieces. The insulated contact plate also helps ensure there is no accidental contact between the metal parts.

The C3EES-2018G connector requires an externally detachable option which allows it to be attached to a shorter cable. This makes it easier to install in tight spaces, as the longer cable is not necessary. The detachable option also helps to reduce the strain on the cable, which can happen when installing a connector without a detachable option.

C3EES-2018G connectors are available in a variety of configurations and sizes. Commonly used sizes are 4-pin and 5-pin. The most commonly used wire sizes are 20, 24, and 26 gauge. The connectors can be purchased as a complete system, including a contact plate, wire, and a backcap for the contact plate. The contact plate is generally made of stainless steel, but can also be made of aluminum or brass.

C3EES-2018G connectors must be correctly wired to ensure a safe and secure connection. To ensure the proper connection, the wires need to be connected to the contact plate with a specific connection pattern. Depending on the application and number of wires, the pattern may vary slightly. The contact plate must also be securely fastened to the plug with screws or other secure connections. To ensure a reliable connection, the screws must be tightened properly.

C3EES-2018G connectors are widely used in a variety of applications, such as automotive, commercial, and industrial. They are often used in environments where a reliable connection is critical, such as motors, alternators, and generators. The connector provides a secure, reliable electrical connection, which is essential for the safe operation of these devices.

The specific data is subject to PDF, and the above content is for reference