Allicdata Part #: | 288-1232-ND |
Manufacturer Part#: |
C40A3P |
Price: | $ 31.44 |
Product Category: | Circuit Protection |
Manufacturer: | American Electrical Inc. |
Short Description: | CIR BRKR MAG-HYDR 40A 480VAC |
More Detail: | N/A |
DataSheet: | C40A3P Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
4 +: | $ 28.57680 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Breaker Type: | Magnetic (Hydraulic Delay) |
Current Rating: | 40A |
Voltage Rating - AC: | 480V |
Number of Poles: | 3 |
Actuator Type: | Lever |
Illumination: | -- |
Illumination Voltage (Nominal): | -- |
Mounting Type: | DIN Rail |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Circuit breakers are electrical devices designed to protect an electrical system from damage due to overloads and short circuits. They are designed with a set of contacts that remain closed under normal circumstances and will open when an electrical fault occurs. One type of circuit breaker is the C40A3P, which is commonly used in industrial and commercial applications.
The C40A3P is a two-pole breaker and is capable of breaking 30 amperes and reconnecting 10,000 amperes of fault current. It is designed to trip upon the occurrence of an overload, short circuit, or a ground fault. It is also designed to trip in the event of a motor stall or an overload current after a motor startup.
The working principle of the C40A3P is based on an electromagnet that is energized by the current flowing through the circuit. The electromagnet pulls the operating rotor of the breaker which causes the contacts to be released, tripping the breaker and interrupting the current flow. This electromagnet also contains a bimetallic strip, which is designed to become distorted if current flowing through the circuit exceeds the pre-determined threshold. This distortion of the strip causes the breaker to trip if an overload or short circuit occurs.
The C40A3P is designed for use in a wide range of industrial and commercial applications, such as electrical panels, motor starters, and control systems. Its robust construction and the ability to break 10,000 amperes of fault current makes it ideal for industrial and commercial applications where high fault current may be encountered. It is designed to switch off devices such as motors, pumps, heaters, and other equipment that are susceptible to damage due to high current overloads and short circuits.
Due to its combination of reliability, safety, and cost effectiveness, the C40A3P circuit breaker is an ideal choice for a variety of industrial and commercial applications. Its simple design, combined with its ability to trip in response to both overloads and short circuits make it a versatile device that is capable of protecting a wide range of electrical equipment from being damaged due to high current faults.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
C40A2P-GFI | American Ele... | 73.2 $ | 1000 | CIR BRKR MAG-HYDR 40A 240... |
C40A3P | American Ele... | 31.44 $ | 1000 | CIR BRKR MAG-HYDR 40A 480... |
C40A2P | American Ele... | 19.96 $ | 1000 | CIR BRKR MAG-HYDR 40A 480... |
C40A1P | American Ele... | 10.98 $ | 1000 | CIR BRKR MAG-HYDR 40A 480... |
C40A1P-80VDC | American Ele... | 12.35 $ | 1000 | CIR BRKR MAG-HYDR 40A 80V... |
AML51-C40A-001 | Honeywell Se... | 6.85 $ | 1000 | BUTTON FOR SWITCH/INDICAT... |
AML51-C40A | Honeywell Se... | 0.0 $ | 1000 | BUTTON/LENS SQ DEAD FRONT... |
CIRCUIT BREAKER MAG-HYDR LEVER
CIRCUIT BREAKER MAG-HYDR LEVER
CIR BRKR MAG-HYDR 200A 160VDC
CIR BRKR MAG-HYDR
CIRC BRKR THRM
CIR BRKR MAG-HYDR LEVER 10A