C501106018

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The C501106018 module is designed for the application of controlling high current LED and large motors. It is suitable for the occasions where larger current is required. Its main features include protection against overvoltage, undervoltage and overcurrent and are designed for both DC and AC power supply. In AC area, the whole module control and powering can be done through two ports. It is also equipped with an input terminal for a current sensor. This allows users to have current feedback from the load so that appropriate current can be supplied to the motor.

The C501106018 module works on the principle of PWM (Pulse Width Modulation). In this method, the voltage is regulated by means of pulse signals with varying widths. The average current to the motor is proportional to the duty cycle of the pulses and thereby allowing control of current. Therefore, this module can regulate the current to the motors, as it is capable of controlling the pulse input from the driving voltage. Thus, the motor is always supplied with correct current, keeping the motor running smoothly.

To set up the C501106018 module, first connect the power output to the motor or LED. Then connect the input port of the module to the power supply for the motor or LED. Once power is supplied, the module is ready for configuration. This can be done using a graphical interface. It includes setting up the current limit, the frequency of the pulse, the duty cycle of the pulse and other parameters.

Once configured, the module can be used to control the current to the motor or LED. The module also includes a built-in current sensor that provides feedback of the current to the motor, which when compared to the configured limit, indicates excess current. This can be used to limit the current flowing into the motor or LED. There are several control strategies that can be employed, including open loop control, which keep the motor fed with fixed current, and closed loop control, which adjusts the current limit depending on various conditions.

The C501106018 module is an effective solution for controlling high current levels for DC and AC motors. It is also used to control the current running to LEDs. This ensures that motors and LEDs are always running optimally, while ensuring that no excess current is caused due to any faults. It is an efficient and cost effective solution for controlling high current applications.

The specific data is subject to PDF, and the above content is for reference