C501116040

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the process of industrial automation, the control signals of PLC and the communication between controller and terminal must be converted into the format of industrial network communication protocol in order to make the controller and the terminal connected. It is necessary to have a device called "converter" or "adapter" to help. C501116040 is a converter produced by the Austrian Zelenka company, which is used to realize the conversion of signal conversion. It should be noted that C501116040 not only has strong signal conversion performance, but also has the advantages of anti-jamming ability, high reliability and simple installation and maintenance.

C501116040 mainly consists of two parts, an Address Controller Unit (ACU) and a Signal Converter Unit (SCU). The ACU module is mainly used for protocol conversion, while the SCU is used for the conversion of control signals. ACU and SCU are connected to each other through the CAN bus, which makes them a complete network node.

The main application fields of C501116040 include: PLC programming like Siemens S7/Step7, SCADA systems, intelligent instrumentation, etc. C501116040 converts the original signal into a CANopen protocol specified by NMT, SYNC, PDO, SDO and other instructions. After the CAN bus protocol is converted, the bus is connected to the control system, and through the CANopen network protocol, the control signals between the controller and the terminal can be transmitted and output.

The working principle of C501116040 is shown in the figure below. At the beginning, the ACU module will receive the signal from the controller through the CAN bus port, and then send the instruction to the SCU module. Through the instruction and the field sensor, the SCU module will convert the original sensor signal into the corresponding CAN open protocol, and then send it out through the CAN port. The target of the signal, that is, the terminal device, receives the signal and stores the real-time data into its own memory.

In summary, C501116040 is an advanced communication converter widely used in industrial automation. Through the conversion of signals and the conversion of CANopen protocol format, it can realize the communication of signals between controller and terminal, helping users to manage and control distributed terminals in a suitable way.

The specific data is subject to PDF, and the above content is for reference