C602109035A06

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The C602109035A06 application field and working principle refers to a 3- Phase, 4- quadrant (3P4Q) programmable regulating power grid. This device is designed for use as an industrial power control system. This programmable power grid can be used for motor speed control, motor variable speed control, and other types of temperature, pressure, and flow control applications. In addition, it is also suitable for power grids that are connected to signal lines, for the purpose of in-line sensing.

The power grid works in the following way. It consists of four terminals, three of which are voltage terminals and the other is a neutral terminal. Three electrical signals are sent to each of the three voltage terminals, and they can be programmed in such a way that the voltage signal on each of the three terminals is proportional to the power demand at that particular terminal. This is called the power control mode of operation, which means that the voltage signal is adjusted according to the power demand at any given point in time.

The fourth terminal, the neutral terminal, is used to control the phase shift between the three electrical signals. By adjusting the phase shift, the power flow on the grid can be regulated. The power flow can also be adjusted through the use of external controllers, such as a PIR (passive infrared) or LEM (load energy management) controller. By programming these controllers according to the desired power demand, the power flow can be increased or decreased as required. This is useful, especially for motors that require variable speeds.

In addition to the power control mode, the C602109035A06 application field and working principle provides a couple of other operations, namely, the interrupt operation and the free running operation. In interrupt operation, the frequency of the three phase signals is adjusted accordingly when an external device, such as a PIR or LEM, sends a signal to the power grid. The power grid will then switch frequencies according to the specific desired frequency of the external device. This helps in increasing the efficiency of the power grid.

The free running operation is used when no external signal is present. This mode makes the three phase signals operate continuously, regardless of the power demand. This helps reduce the costs related to the power required for operation, since the power is drawn only when necessary. The power grid also has a battery backup unit which can be used to regulate the voltage signals.

The C602109035A06 application field and working principle provide users with a wide range of different control options for their power system. It can be used in industrial control applications, for motor speed control, motor variable speed control, temperature, pressure, and flow control. It is also suitable for power grids connected to signal lines, for the purpose of in-line sensing. In addition, the power grid includes a battery backup unit for consistent and accurate operation. All these features make the C602109035A06 a great choice for industrial power control systems.

The specific data is subject to PDF, and the above content is for reference