C602112043A06

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

C602112043A06 is a single-pole, double-throw (SPDT) Solid State Relay (SSR). It is an optically coupled electronics device that is used to control or switch on and off the power of a load using a low level electronic signal. This SSR is able to switch on/off up to 240VAC (or 277VAC, depending upon the model) and up to 5 Amps of current.

The C602112043A06 is a 3-pin device that consists of an input interface, output interface, and a case. The input interface is responsible for taking input signals and controlling the relay’s output, while the output interface controls the load or electrical device. The case houses the electrical components, which include the optocoupler, LED, phototransistor, MOSFET, and other associated components.

Application Field

SSR relays like the C602112043A06 are most commonly used in low-voltage applications such as heating and lighting control systems. They are also used for controlling motors, solenoid valves, and other electrical applications. These types of relays can also be used in industrial automation and robotics.

The C602112043A06 SSR is designed to be used for on-off switching applications, such as fan/pump and lighting control, as well as temperature and humidity monitoring systems. It can also be used in consumer appliances, voice recognition systems, and measure and control systems.

Working Principle

The C602112043A06 SSR uses optical isolation to switch the output. The basic principle of operation for this device is as follows: An input signal is supplied to the input interface of the SSR, which triggers the optocoupler’s LED. The LED then emits visible light that impinges onto the phototransistor’s active region. This causes the phototransistor to conduct and switch on the power to the load circuit. When the input signal is removed, the optocoupler’s LED will stop emitting visible light, causing the phototransistor to stop conducting and power to the load to be switched off.

The C602112043A06 SSR also uses a MOSFET to switch the output on and off. A MOSFET is an electronic switch that can switch high voltage and current with low power input. It is much more reliable than a mechanical switch and can handle more power than a typical optocoupler. The MOSFET also ensures that the C602112043A06 can switch high inrush currents without causing a current drop that can lead to premature failure of the relay.

Conclusion

In conclusion, the C602112043A06 SSR is a reliable, optically isolated solid-state relay capable of switching up to 240V/277VAC and up to 5A. It is mainly used in low-voltage applications such as lighting and heater control systems as well as in robotics and industrial automation. The C602112043A06 uses an optocoupler and MOSFET to switch the output, ensuring reliable performance and high inrush current handling capability.

The specific data is subject to PDF, and the above content is for reference