C783CD

Series:	--
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Structure:	Single
Number of SCRs, Diodes:	1 SCR
Voltage - Off State:	3.4kV
Current - On State (It (AV)) (Max):	1800A
Current - On State (It (RMS)) (Max):	2826A
Voltage - Gate Trigger (Vgt) (Max):	4.5V
Current - Gate Trigger (Igt) (Max):	250mA
Current - Non Rep. Surge 50, 60Hz (Itsm):	27000A, 29000A
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Chassis Mount
Package / Case:	TO-200AF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs - Modules

The C783CD is one of the many types of thyristors available on the market and is a power control module contained in a dual-in-line package (DIP). A thyristor is a type of semiconductor that has two distinct states, either in a "cut-off" state or a "latching" state. The C783CD can be used as a power control module for industrial applications and is usually found in motor drives, welding equipment, rectifier circuits, and other industrial machines.

The C783CD is composed of four individual SCRs (silicon-controlled rectifiers) connected in a mechanically bonded package. The four SCRs form a bridge rectifier configuration which allows the module to switch both AC and DC loads. The technology used in the C783CD is low-voltage, low-frequency, and high-current, allowing it to be used in various industrial applications.

The C783CD works by passing a current through the thyristors, which then activates the semiconductor device. When the device has been activated, the current triggers a feedback loop which increases the current passing through the thyristor. This feedback loop then causes the device to remain \'on\', meaning that the current will continually pass through the thyristor until the device is deactivated by reversing the current.

The C783CD has several advantages when used in industrial applications. The module\'s low-voltage and low-frequency parameters allow it to be used in circuits that would be too dangerous for other, more powerful thyristors. The C783CD also offers good temperature coefficient and stability, meaning that it can be relied upon to remain in a consistent state without any temperature variation. Lastly, the bridge rectifier configuration that the device uses allows it to switch both AC and DC loads.

In conclusion, the C783CD is an ideal power control module for industrial applications and is composed of four SCRs connected in a bridge rectifier configuration. The technology used in the device is low-voltage, low-frequency and high-current, allowing it to be used in various industrial applications. The C783CD offers good temperature coefficient and stability, and is able to switch both AC and DC loads.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description