C7R50JT

Series:	C, CGS
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	500 mOhms
Tolerance:	±5%
Power (Watts):	7W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±90ppm/°C
Operating Temperature:	-55°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.335" Dia x 0.866" L (8.50mm x 22.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: C7R50JT Application Field and Working Principle

Through hole resistors are components which are attached to the outside of a circuit board and have one or more metal pins, which protrude into the board and provide an electrical connection between the resistor and the board. Because of the physical shape of through hole resistors, they are well suited for mounting onto large printed circuit boards, where they can provide a reliable electrical connection between the circuit board traces and the resistor.The C7R50JT is a carbon film through hole resistor that is used in many consumer electronics. It is designed for use in small signal circuits such as logic circuitry, attenuators, power supplies, and other applications where resistance of current is important. It is a high quality resistor that offers good temperature stability, low temperature coefficient, and good noise characteristics.The C7R50JT is designed with an etched-copper-alloy resistive element which provides low temperature coefficients, allowing it to perform reliably over the life of the product. The C7R50JT’s resistive element is pressed into a ceramic body which is hermetically sealed with a graphite containing the desired resistance value. The connection pins of the resistor are then soldered onto the printed circuit board in order to connect it to the circuit.In operation, currents flow from one side of the resistor to the other, and the resistor works by dissipating this current flow in the form of heat. The electrical resistance of the resistor is determined by the number of molecules that make up the resistive element. This resistance is exhibited by the resistor as an opposing voltage drop across its terminals when a current is applied across them. The higher the number of molecules, the greater the resistance and the higher the voltage drop will be.The C7R50JT is ideal for use in circuit board assemblies where precise resistance values must be maintained over wide temperature ranges. As mentioned, its physical form factor makes it perfectly suited for mounting on big circuit boards. Its low temperature coefficient allows it to resist fluctuations in temperature, ensuring that the resistance values remain consistent over a wide range of temperatures.The C7R50JT is also designed to offer good noise characteristics and low distortion, making it ideal for applications where small signal circuits are being used, such as power supplies, attenuators, logic circuitry, and so on. With its high quality construction and reliable performance, the C7R50JT is a great choice for any circuit board design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description