C9028A.41.10 Cables, Wires

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple conductor cables are cables that consist of more than two conductors, insulated from each other and individually wrapped in a protective jacket. The specific multiple conductor cable C9028A.41.10 is designed for use in indoor, although it can be used outdoors in dry locations. It is a low-voltage local area network (LAN) standard four-pair cable with a maximum operating temperature range of -20°C to 80°C.

The C9028A.41.10 is a Category 5E rated, 4 pair, unshielded twisted pair cable. The transmission frequency is 250 MHz and the data rate is 1000 Mbps. It can be used for both voice and data applications, including 100Base T, token ring, Ethernet, Fast Ethernet, and Gigabit Ethernet applications. The external jacket is rated to comply with UL tested standard E175841 1667. It is flame-resistant and sunlight-resistant.

The multiple conductors of the C9028A.41.10 are made of 6-12 AWG (American Wire Gauge) solid copper conductor strands, twisted and then wrapped with a polyvinyl chloride (PVC) insulation. This insulation has a diameter of 0.016 inches (0.4 mm) and an operating temperature range of -20°C to 80°C. Additionally, the cable is equipped with an overall aluminum-mylar tape shield to help reduce crosstalk and eliminate noise. The shield has a separator and drain wire to aid in the termination process.

The working principle of the C9028A.41.10 multiple conductor cable is simple but effective. The signal is sent through the twisted pair of copper conductors, insulated from each other, and then wrapped in a layer of PVC insulation. As the signal travels down the cable, it is shielded by the aluminum-mylar tape. This helps reduce crosstalk and eliminate noise, making sure the signal is received as accurately as possible. On the other end, the signal is then sent to the receiver, completing the transmission process.

Ultimately, the C9028A.41.10 multiple conductor cable is a reliable way to transmit data across a wide range of applications. Its low-voltage rating makes it suitable for indoor applications, while its reliable insulation, shielding, and transmission frequency all help make sure that data is transmitted accurately from one point to another.

The specific data is subject to PDF, and the above content is for reference