C93423

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are a type of electronic switch used in various functions and applications. The C93423 is a single-pole, double throw (SPDT) latching signal relay. It is designed to switch signal level applications up to two Amps (2A).

Application Field

The C93423 relay can be used in a wide range of signal-level applications, including remote switching, automation, and control systems. It is ideal for applications where control signals need to be applied and removed remotely. Typical applications include: lighting systems, security systems, HVAC (heating, ventilation and air conditioning) systems, irrigation systems, and process control systems.

Working Principle

The C93423 relay consists of a latching electromagnet, contacts, and a switch body. When current is sent to the electromagnet, it creates an electromagnetic field that causes the latching contacts to move, effectively completing the circuit and allowing the current to flow to the desired device. The latching mechanism allows the relay to “remember” the position of the contacts and stay in that position even after the electromagnet is switched off. To reset the contacts and return to its original position, the electromagnet must be triggered again with a different current. The latching action ensures that less power is needed to maintain the current than with a traditional, non-latching relay.

The C93423 is a single-pole, double-throw (SPDT) relay, meaning that it can be used to control one device with two contacts. It allows an electrical signal to be switched on and off based on a control signal. The relay’s contacts can be connected in one of two configurations: a normally open (NO) configuration, or a normally closed (NC) configuration. In the NO configuration, the device will be off unless the relay is triggered. In the NC configuration, the device will be on unless the relay is triggered.

The C93423 relay is rated for up to two amps (2A) of current, and can be used to switch both AC and DC signals. It is designed to be compact and cost-effective, making it an ideal choice for low-power signal switching applications.

The specific data is subject to PDF, and the above content is for reference