CA12N-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are used in a variety of applications to convert DC power from one voltage to another. The CA12N-5 is a DC-DC converter module that can convert a wide range of input voltages into a fixed, regulated 5-volt DC output. This module has a wide range of applications in areas such as automotive, mobile, medical, aviation, and marine power supplies.

The CA12N-5 DC-DC converter module uses a boost topology to step up the input voltage to a higher voltage, then a buck regulator to step down the output voltage to the required 5 volts. This allows the module to operate efficiently over a wide input voltage range, from 4.5 to 24 volts.

The high efficiency of the CA12N-5 is achieved by using synchronous rectification to reduce power losses. During the boost phase, the switch MOSFETs are operated by a dedicated current source circuit, ensuring they switch quickly and efficiently. During the buck phase, the MOSFETs are operated in synchronous rectification mode, meaning the low-side MOSFETS are actively conducting when the high-side MOSFET is switched off. This reduces power loss in the MOSFETs and increases efficiency. Besides, a high frequency switching regulator is used in the module, so that the small form factor of the module can be obtained while providing high efficiency (up to 96% in some cases).

The CA12N-5 converter module has an output voltage that is precisely regulated, even under varying line and load conditions. The module can provide up to 3 amps with adequate cooling and an over-temperature protection feature is provided to turn off the output voltage above a set temperature.

The CA12N-5 module also offers a number of features designed to ensure reliable operation. It has an under-voltage locking feature which shuts down the module if the input voltage falls below a pre-determined level in order to protect the circuit. It has minimum on-time limiting which limits the duty cycle when the input voltage is very low, reducing the power loss due to conduction. The module also has over-current protection and short-circuit protection features to protect the device against overload conditions.

The CA12N-5 is a versatile and reliable DC-DC converter module ideal for a wide range of applications requiring a switch mode power supply. Its wide input voltage range, high efficiency, and protective features make it a great choice for mobile, medical, automotive, aviation, and marine power supplies.

The specific data is subject to PDF, and the above content is for reference