CA413068R00KS70

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electrical components that allow for precise resistance control in a variety of applications. A through hole resistor consists of two metal strips laid on a cylindrical base. The metal strips are typically made of nickel and copper and are insulated with an insulating layer made of epoxy resin or other dielectric material. The two metal strips are connected by metal bars, which serve to control the current flowing through the resistor. A typical through hole resistor has a copper or nickel core surrounded by a dielectric material. The diameter of the core can range from 0.75 to 4.5mm and the length is usually between 10 and 25mm. The amount of resistance in the resistor is determined by the size of the core, the voltage, and the current flowing through the resistor. The resistance can be adjusted depending on the amount of current flowing through the resistor.

CA413068R00KS70 is a type of through hole resistor designed for a wide variety of applications. It has a maximum operating voltage of 300 volts and a maximum power dissipation of 2 watts. It is available in several resistance values, ranging from 0.1 ohms to 1,000 ohms. The resistor is designed to provide excellent heat dissipation and can operate over a wide temperature range from -40°C to +105°C. The resistor also has a low resistance tolerance of ±2%, allowing for accurate resistance control. The resistor also has a low noise level of 0.1 mA and a high frequency response of up to 10kHz.

The CA413068R00KS70 is most commonly used in a variety of different applications including electronic circuits, controls systems, automobile electronics, and audio systems. It can be used as a voltage stabilizer, current regulator, bridge rectifier, and for power regulation. In automotive applications, the resistor is used to regulate the amount of current flowing to various electric components such as alternators and starter motors. The resistor also has numerous applications in the field of industrial automation, such as controlling the speed of electric motors and pumps. It is also widely used in audio systems as a part of the crossover circuits that allow for the separation of low frequency and high frequency signals.

The working principle of the CA413068R00KS70 is based on the concept of Ohm’s Law. According to this law, the current passing through a resistor is directly proportional to the voltage applied to the resistor. Thus, by increasing the voltage, the current increases in proportion. Similarly, by decreasing the voltage, the current decreases. This creates a slope that can be used to adjust the resistance of the resistor. By adjusting the resistance of the resistor, the amount of current flowing through it can be controlled.

In conclusion, the CA413068R00KS70 is a type of through hole resistor designed for a wide variety of applications. It has a maximum operating voltage of 300 volts and a maximum power dissipation of 2 watts. It is available in several resistance values, ranging from 0.1 ohms to 1,000 ohms. The resistor is designed to provide excellent heat dissipation and can operate over a wide temperature range from -40°C to +105°C. Its working principle is based on the concept of Ohm’s Law, which states that the current passing through a resistor is directly proportional to the voltage applied to the resistor. The resistor is most commonly used in electronic circuits, controls systems, automobile electronics, and audio systems.

The specific data is subject to PDF, and the above content is for reference