CA5100200R0JR05

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors come in a wide variety of designs, sizes, and resistances. They are available in a range of tolerances as well as power ratings, depending on the type of resistor. The most common type is the axial-lead through hole resistor, which is usually composed of a metal component, typically a copper wire, covered in a insulator. The CA5100200R0JR05 is an example of an axial-lead through hole resistor.

Applications

The CA5100200R0JR05 is most commonly used for limiting the current to a particular circuit. This is especially important in lighting applications since too much current through a circuit can cause a fire. As a result, through hole resistors are often used in automotive applications such as headlights, where current must be kept within a certain range.

The CA5100200R0JR05 is also used for protecting against overvoltages. This is important for electronic devices as it can prevent damaging overvoltages from frying the device. In addition, these types of resistors can also be used as “bumpers” to stop short-circuiting and protect against shock.

Finally, the CA5100200R0JR05 is often used to regulate AC or DC current in power supplies, such as those found in computers, phones, and televisions. This type of resistor is important in creating a stable power supply to avoid damaging surges.

Working Principle

The CA5100200R0JR05 operates by limiting the electrical current flowing through a particular circuit. It does this by controlling the amount of resistance in the circuit, with the value of the resistor controlling the electrical current.

The resistor works by blocking a portion of the electrical current, thus preventing it from reaching the rest of the circuit. This works because all electrical currents must move through materials with some resistance. In other words, if a material is relatively non-resistant to electricity, such as metal, then electricity will flow through it with much greater ease than a material that has more resistance, such as rubber.

The amount of resistance in the circuit will determine the voltage and current that will actually reach other components in the circuit. This is why the resistance of the CA5100200R0JR05 is so important. If the resistance is too low, then the voltage and current that reaches the other components will be too high and can damage them. If the resistance is too high, then the opposite is true and not enough voltage or current will reach the other components, leading to poor performance.

Conclusion

The CA5100200R0JR05 is a type of through hole resistor commonly used in a variety of applications, such as to limit the current to a certain circuit, protect against overvoltages, or regulate a power supply. It works by controlling the amount of resistance in the circuit, with the value of the resistor limiting how much current can pass through it. Therefore, it is an important component in many electronic systems.

The specific data is subject to PDF, and the above content is for reference