CAP008DG-TL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CAP008DG-TL is a specialized IC manufactured by Exar Corporation. This type of integrated circuitry is used in a variety of applications, ranging from signal conditioning and digital signal processing, to power management and analog systems. The device is an 8-channel, high-performance, dynamic gain differential operational transconductance amplifier (OTA). Each channel operates at a gain of between 9 to 6 dB in bipolar, low-noise configurations.

The integrated circuit also includes 24-bit parallel port interface, an 8x8 multiplier based on a 4-wire SPI interface, two 4-bit programmable linear and two 8-bit programmable linear voltage controlled amplifiers (VCA)s and a 48-pin microcontroller. The device also features internal and external synchronization capabilities, window comparator, fast logic and analog outputs, and a wide temperature range of -55C to +105C. The device operates between +2.25V to +3.6V.

The primary use of the CAP008DG-TL integrated circuit is for signal conditioning and digital signal processing. It is designed to use high-gain differential operational transconductance amplifiers (OTAs) to convert continuous analog signals into digital codes. It measures the amount of gain in comparison to the original signal amplitude and provides an output voltage which is proportional to the gain. The IC also performs gain control on multiple programmable gain function generator (GGF) stages, which can be used to precisely control the distortion of audio signals. The amplifier is also used to provide a synchronized output signal with very low noise.

The working principle of CAP008DG-TL is based on the input differential amplifier. This amplifier is formed using a pair of OTAs, connected in parallel. The two OTAs are connected to a pair of input terminals, with the reference input connected to a reference voltage (VREF). This reference voltage forms the basis of gain measurement, as a comparison to the incoming signal amplitude which is applied to the other terminal. The OTA acts as a voltage-controlled gain device, with a feedback connection that allows for a wide range of gain settings.

The differential amplifier outputs are then buffered by a NPN transistor, which is connected in series with the OTA’s output. This buffering stage provides additional power gain and a higher voltage swing. At the output of the NPN transistor, a low-pass filter is used to remove any unwanted signals or noise. The filtered output voltage is then applied to a voltage-controlled attenuator, which is used to control the gain of the integrated circuit.

In addition to the gain control feature, the CAP008DG-TL also includes a range of other analog components. The device includes an 8x8 multiplier based on a 4-wire SPI interface and two 4-bit programmable linear and two 8-bit programmable linear voltage-controlled amplifiers (VCA)s. The IC also features a 24-bit parallel port interface, a fast logic and analog outputs, and wide temperature range. All the features combined make this a extremely versatile integrated circuit for signal conditioning and digital signal processing.

The specific data is subject to PDF, and the above content is for reference