CAT25-393JALF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays are electrical components that are commonly used in a variety of electronics and electrical systems. The CAT25-393JALF series of resistor networks is particularly popular due to its small size, high reliability and excellent performance. The CAT25-393JALF is an SMT (Surface Mount Technology) type chip containing 25 discrete resistors that are connected internally in various combinations.

There are two main types of network configurations available – either through-hole or surface-mount. Through-hole networks are connected by means of wires which pass through the IC package and are soldered onto the board. This type of construction is generally more expensive than surface-mount networks, as it requires considerable amount of manual work. Surface-mount networks are soldered directly onto the board, which makes for much quicker and easier installation. The CAT25-393JALF is a through-hole network.

The standard value of resistance provided by the CAT25-393JALF varies depending on the configuration of the network. The most common configurations are referred to as “G Series” and “S Series”. The G Series offers resistance values that range from 100KΩ to 500KΩwhile the S Series offers resistance values ranging from 10KΩ to 50KΩ. The resistance values also vary depending on the number of resistors used in the network – the CAT25-393JALF can be configured with up to 25 different resistors.

The working principle of the CAT25-393JALF is straightforward. The interconnects inside the IC package are routed to the individual resistor elements which are then connected to the board traces. As the current flows through the network, the resistors restrict the current, thereby producing the desired voltage drop. The value of the voltage drop is determined by the specific resistance value of the resistor elements.

The CAT25-393JALF is commonly used in a variety of applications, such as voltage dividers, current sensing, signal conditioning, power management and over-voltage protection. In voltage dividers, the network is used to divide a high input voltage into two or more lower output voltages. In current sensing, the network is used to measure the amount of current flowing through a circuit. In signal conditioning, the network is used to filter out unwanted noise in the signal. In power management, the network is used to regulate the operation of other electronic components. Lastly, in over-voltage protection, the network is used to limit the voltage that can be applied to a component to protect it from damage.

The CAT25-393JALF is an excellent choice for applications where miniaturization and high reliability are required. Its small size makes it well suited for use in mobile devices such as smartphones and tablets,while its superior performance makes it suitable for use in sophisticated electronic systems. It also has a very low failure rate,which makes it a reliable and cost-effective solution for many applications.

The specific data is subject to PDF, and the above content is for reference