CB15JB2R20

Through Hole Resistors are an important and widely used form of electronic component. The CB15JB2R20 is one type of through hole resistor. This resistor is an axial-lead component, meaning it has its lead wires protruding through the body of the resistor. It has a power rating of 2 W and a wide range of resistance values.

The CB15JB2R20 is available in a variety of resistance values, from 1 Ohm to 10 MOhms (1M). It has a tolerance of 5% and a temperature coefficient of 200ppm/K. The pin pitch, or distance between each of the lead wires, is 8.6mm. The body material is made of Slurry, offered in a choice of five colors to indicate resistance value.

The CB15JB2R20 is best suited for low power applications. It is often used with digital circuits and analog circuits, and can also be used for timing and DC biasing applications. It is particularly suited for use in high frequency circuits due to its low capacitance, low inductance, and low resistance value.

The CB15JB2R20 works on the principle of oxidation. The resistor is made by coating the surface with a special type of varistor material, such as nickel and cobalt. The material oxidizes upon contact with air, forming an electrolytic capacitor which controls the current passing through it. It is this depletion capacitance that allows the resistance value to be adjusted.

In conclusion, the CB15JB2R20 through hole resistor is an ideal choice for low power applications. Its wide variety of resistance values, low capacitance, low inductance, and low resistance make it ideal for digital and analog and high frequency circuits. The oxidation process also makes it easy to adjust the resistance value.