CB3JBR200

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are essential components used in electronic circuits. The CB3JBR200 is a through-hole resistor that is used in applications where high power is required. Its working principle relies on the heating of an element to dissipate energy and the resistance created by the element. The CB3JBR200 is designed to provide superior energy dissipation over other conventional resistors for applications such as power supplies, motor drives, and power amplifiers.

The CB3JBR200 is a three-watt resistor with a power rating of 200V. Ithas a maximum dissipation factor of 0.012 and a maximum temperature coefficient of ±200ppm/°C. The CB3JBR200 is a through-hole resistor, meaning that it is mounted by holes in a printed circuit board. This type of resistor is advantageous because its thermal resistance is low, meaning it can dissipate heat quickly and effectively.

The working principle of the CB3JBR200 is based on the heating of an element that is tightly sealed in an insulated enclosure. When the resistor is attached to a power supply, current is passed through the element, causing the element to be heated up. This heat is then dissipated through the casing of the resistor. As the element heats up, it creates a resistance that limits the flow of current. This is the basis for the principle of operation of the CB3JBR200.

When the CB3JBR200 is used in automotive or electronic applications, it is important to consider several factors. One important factor is the temperature rating of the resistor. The CB3JBR200 is designed to operate at temperatures between -55°C and +150°C. As a result, it must be mounted correctly to ensure that it does not exceed its temperature rating. Proper mounting of the CB3JBR200 can prevent degradation of its performance over time.

It is also important to consider the management of current flowing through the CB3JBR200 in these applications. Overheating of the element due to an excessive amount of current is one of the main causes of damage to the CB3JBR200. The current rating must be adjusted to ensure that the resistor does not overheat and become permanently damaged. This can be done by adjusting the power supply voltage or current limiters depending on the application.

The CB3JBR200 is a versatile resistor that can be used for a wide range of applications, including power supplies, motor drives, power amplifiers, and automotive applications. Its through-hole mounting is advantageous for dissipating heat quickly and effectively. Its temperature rating of -55°C to +150°C must be taken into account to ensure that it does not overheat and become damaged. Additionally, the current flowing through the resistor must be managed properly to prevent it from becoming damaged due to overheating.

The specific data is subject to PDF, and the above content is for reference