CBEI-2G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CBEI-2G, also known as the Chinese Regional Network Edge Interface (C-RNEI), is an application field and working principle of Ethernet that enables the transmission of Ethernet-based data between two or more networks over a given length of distance. The purpose of the CBEI-2G is to provide an efficient and reliable way for businesses and organizations to securely transport data between different locations across local and wide area networks. The CBEI-2G allows for scalable broadband connections, making it an ideal choice for both enterprise and consumer applications.

The CBEI-2G is composed of two parts: a transmitter and a receiver. The transmitter is located at the sending network\'s gateway, while the receiver is located at the receiving network\'s gateway. At each end of the connection, a faceplate is installed which serves as the interface to the transmitting/receiving electronics. The faceplate is connected to the Ethernet interface, which allows for transmission of the data. The faceplate also serves as the interface between the user and the Ethernet network allowing the user to adjust the network parameters such as speed, port selection, and authentication.

The CBEI-2G is based on the IEEE 802.3 standard, specifically the Layer 2 access control protocols and provides full-duplex transmission of data in full-duplex mode. This standard requires that each device on the network be authenticated prior to data transmission. This authentication process requires a keystone, which is a device that provides authentication to all nodes on the network. Keystones can be embedded in a faceplate or connected externally via an external port. In addition, the CBEI-2G standard requires that each data transmission must traverse all nodes on the network in order to complete the data transaction.

The CBEI-2G is also referred to as the Keystone-Faceplate-Frame (KFF) protocol. The KFF protocol defines the hardware components from a faceplate, a frame, and a keystone. The faceplate is a thin sheet of aluminum or plastic used to house the electronics for the Ethernet interface. Frames are used to hold the faceplates in place, while the keystone is used to authenticate the nodes and maintain the integrity of the Ethernet connection.

The keystone can be either physically or virtually embedded within a faceplate or frame. A physical keystone is an electronic circuit board embedded in a faceplate or frame. This allows the user to adjust or configure the settings of the Ethernet connection. A virtual keystone is an embedded or external software program used to authenticate nodes and secure communications on the network.

CBEI-2G networks can be used for a variety of applications ranging from plain old telephone systems (POTS) to large-scale Ethernet networks. They are designed to provide secure, reliable, and scalable data transmission. An added advantage of the CBEI-2G is that it is relatively easy to install and maintain. This makes it ideal for networking applications that require a high degree of security and reliability.

The specific data is subject to PDF, and the above content is for reference