CBR2-L040M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CBR2-L040M is a preferred choice of automotive application and consumer electronics, due to its low voltage noise, long-term reliability and 25000V of breakdown voltage. This type of bridge rectifier diodes is majorly used to bridge parts of electrical circuits, converting alternating current (AC) to direct current (DC) with low power consumption and high efficiency.

A rectifier diode is a one-way electrical device, also known as a diode, that serves as a two-way (bidirectional) switch of current flow. They allow current to pass through AC circuits and convert it to DC, which can be used to power electronic components in a circuit.

A bridge rectifier is an electronic device composed of four or more rectifier diodes that converts alternating current (AC) to direct current (DC). Two diodes are connected in series and two are connected in parallel, forming a closed circuit with opposite orientation of the two sets of diodes. When AC is connected to the bridge rectifier, the first diode will start conducting, then the second one will conduct as well and so on until the complete electrical cycle has passed. This allows current to flow continuously in one direction and produces DC.

The CBR2-L040M bridge rectifier is a 40 Amp, 40 Millivolt bridge rectifier. It consists of four individual diodes mounted on a common substrate made of copper alloy parts and a heat sink plate. The copper alloy parts consist of a plate, a solder heat-sink panel and four floating plates. The CBR2-L040M\'s maximum working voltage is 600 volts, with a maximum forward current of 40 amps and an operating temperature range of -55 to 125 degrees Celsius. The CBR2-L040M is designed to be used in automotive applications and consumer electronics and is an ideal choice for high switching frequency and noise sensitive applications.

The working principle of the CBR2-L040M is simple and efficient. When alternating current (AC) is applied to the bridge rectifier the electrical charge from the AC passes through the individual diodes, one in each direction. The current then turns to a direct current (DC) and emits from the bridge rectifier output towards the load.

When AC is applied, the bridge rectifier diodes stop conducting after each half of the AC cycle. The voltage therefore drops as the Electrical field lines no longer have a continuous forward direction. After the half cycle, the current flow is reversed, and current can start flowing forward in the reverse direction. This means that the voltage starts increasing again. So in essence the AC current is changed in its polarity on the other half of the cycle, while maintaining the direction of the current in each half cycle.

The CBR2-L040M bridge rectifier is a reliable tool for converting AC to DC, which is important for powering electronic components in circuits. Its low voltage noise, long-term reliability and 25000V of breakdown voltage make it a popular choice for automotive applications and consumer electronics.

The specific data is subject to PDF, and the above content is for reference