CBS100481R8-F6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are electronic components that are designed to convert a direct current (DC) source from one voltage to another voltage level with little to no power loss. The DC DC converter CBS100481R8-F6 is a commonly used module, being an 8-pin, single-channel, non-isolated buck converter, providing high efficiency at a wide output current range of 0.5A to 6A.

The typical application field for this DC DC converter is wide, extending from industrial equipment to consumer electronics. For example, as their output voltage and current are adjustable and can be thoroughly customized for specific demands, CBS100481R8-F6 DC DC converters are excellent for providing power for devices with complex and varied power requirements. This could include powering medical devices, radio frequency identification (RFID), Internet of Things (IoT), consumer electronics, etc.

The working principle of the CBS100481R8-F6 DC DC converter is based on the buck converter design. It consists of a controllable transistor and an inductor between input and output. This type of converter is able to use a buck-type (step down) or boost-type (step up) converter depending on the needs of the application. For buck converters, voltage conversion is the result of the inductor storing energy while the input voltage is high and then releasing it while the output voltage is high. To control the output, the transistor is turned on and off at a certain frequency, which is known as the switching frequency.

This DC DC converter has a wide input voltage range of 3V to 40V and a fully adjustable output voltage from 0V up to a value slightly lower than the input. The output current can range from 0.5A to 6A, depending on the input voltage and on the output voltage. It is able to handle very small voltage and current fluctuations, achieving an efficiency of up to 95%.

The main features of this DC DC converter are its ease of use, adjustability, and low power consumption. The module has an on-board trim operation, which makes it simple to adjust the output voltage and current without the use of additional components. It also has built-in current limit and overtemperature protection. This DC DC converter has a low, no-load power consumption of only 11mW, making it an environmentally friendly power source.

The CBS100481R8-F6 DC DC converter from TiMOS is an efficient and reliable power conversion solution, providing adjustable DC voltage output from a wide input voltage range with high efficiency and very small power losses. It is an excellent choice for a variety of industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference