Current - Output (Max):	2.5A
Control Features:	Enable, Active Low
Size / Dimension:	1.40" L x 0.89" W x 0.33" H (35.6mm x 22.6mm x 8.5mm)
Package / Case:	7-DIP Module
Mounting Type:	Through Hole
Efficiency:	--
Operating Temperature:	-40°C ~ 85°C
Features:	--
Applications:	ITE (Commercial)
Voltage - Isolation:	500V
Power (Watts):	10W
Series:	CC-E
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	3.3V
Voltage - Input (Max):	18V
Voltage - Input (Min):	9V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC-DC converters are electronic devices used to convert direct current (DC) from one voltage level to another. They are often used in industrial, automotive, and consumer applications to provide a regulated voltage output from an unregulated voltage input.The CC10-1203SF-E DC-DC converter is a synchronous, step-down dc-dc converter with a wide input voltage range and an adjustable output voltage. It utilizes fixed-frequency, current-mode control for low-output-ripple voltage and fast transient response. It is housed in a package containing two semiconductor dies, two planar transformers, and two outputs.The CC10-1203SF-E DC-DC converter is suitable for use in a variety of applications. It is well-suited for automotive applications, such as battery charging, in-vehicle networking, and power-factor correction. It is also suitable for use in industrial and consumer applications, such as microprocessors and power system control, as well as any other applications requiring regulated outputs from unregulated inputs.The working principle of the CC10-1203SF-E DC-DC converter is based on the buck converter topology. The two planar transformers act as coupled inductors, allowing for a high degree of control and efficiency. The transformer is driven by a full-bridge topology, and produces an output voltage that is proportional to its input voltage. The converter uses a switching-mode technique to convert the input voltage to a lower, regulated voltage. During the switching cycle, the primary-side power device, which is also the power switch, turns on, and the secondary-side power device, which is also the diode, turns off. The input voltage is applied to both the primary and secondary windings of the transformer, and a portion of this voltage is stored in the transformer\'s inductive energy. When the primary-side power device turns off, the stored energy in the transformer is released and the voltage across the secondary-side power device will reduce to zero. The voltage across the secondary winding will drop, producing the output voltage. This voltage will remain constant until the cycle is repeated.The CC10-1203SF-E DC-DC converter provides good step-down regulation, fast transient response, low ripple voltage, and high efficiency. It is suitable for use in many industrial, consumer, automotive, and other applications, and is a reliable and safe choice for high-voltage input and regulated output voltage requirements.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description