CC2400-RTB1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Transceiver ICs are commonly used in wireless communication applications that require the transmission and reception of radio frequency (RF) signals from a variety of devices.The CC2400-RTB1 is a highly integrated RF transceiver IC for 2.4GHz Zigbee and ISM applications. It is designed to minimize the cost and complexity of implementing an RF link. It integrates the transmit, receive,baseband processor and the components necessary for the regulation of the radio frequency link.

The CC2400-RTB1 operates in the 2.4GHz ISM/SRD frequency band, allowing for both worldwide deployment and low cost of implementation. The device is designed for low-power operation and its highly integrated architecture allows for advanced wireless solutions in the Zigbee and ISM protocol standards. The CC2400-RTB1 supports multiple output power levels up to 10dBm and supports up to two antenna configurations, which provide flexibility in system design.

The CC2400-RTB1 is supported by a number of advanced features, such as freque ncy agility, multiple FIFO buffers for packet manipulation, programmable filters and interrupt capabilities. It also supports an optional cryptography engine for applications such as Zigbee and Wireless M-Bus. The device also supports a wide range of modulation schemes, including both OOK and FSK.

The CC2400-RTB1 also has a wide range of application fields ranging from utility meters, consumer electronics, and industrial applications to radio frequency identification, alarm systems, and medical monitoring. In addition, the CC2400-RTB1 has proven to be excellent for a variety of ISM/SRD applications such as Low Power Wide Area Network (LPWAN).

The working principle of the CC2400-RTB1 is based on the modulation of radio frequency carrier signals with data streams. The CC2400-RTB1 supports a number of modulation schemes includingOOK, FSK, and PSK. The device is capable of modulating signals using three different processing modes – direct modulation, coherent modulation, and non-coherent modulation.In non-coherent mode, the transmitter unit modulates a continuous wave carrier signal without the need for a reference signal from the receiver unit. In coherent mode, a reference signal is used to accurately phase-lock the transmitted signal to the received signal. The direct modulation mode does not use a reference signal, but instead directly modulates the incoming data onto the radio frequency carrier.

In addition to the carrier modulation, the device is also capable of manipulating the transmitted signal using a number of frequency agility techniques. This includes the use of frequency hopping, modulation index optimization, and wide band and narrow band (ratio) modulation. Frequency hopping is a process of rapidly changing the transmission frequency between a series of predetermined frequencies, while modulation index optimization is used to achieve optimum signal-to-noise ratio. The CC2400-RTB1 supports both wide band and narrow band (ratio) modulation, which is used to increase the range of attainable signal processing capabilities.

Finally, the CC2400-RTB1 also supports a number of other features that make it suitable for a variety of wireless communication applications. These include programmable filters to reduce interference, support for multiple output power levels, and support for optional cryptography engines. The use of these features allows the CC2400-RTB1 to provide reliable and energy efficient wireless communication solutions.

The specific data is subject to PDF, and the above content is for reference