CCPD-033X-25-161.1328

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are vital components within circuits due to their ability to generate signals and power various systems. A specific type of oscillator, the CCPD-033X-25-161.1328, is of particular use in creating sustained oscillations within an application. This oscillator utilizes the Colpitts topology with an external capacitor and series-connected transistor.

Application Field

The CCPD-033X-25-161.1328 oscillator is primarily designed for use in oscillator applications. Such applications can include radio frequency (RF) signal generators, test signal sources, frequency counters, and circuit prototyping. Oscillator sources, such as this oscillator, are necessary for the sustainment of resonance within a system.

Working Principle

This oscillator utilizes a Colpitts topology, which invites two capacitors and one inductor into the circuit. As a result, two capacitors must be connected in parallel–one to ground and one to the base of the transistor–and an inductor in series with the transistor. The collected energy is stored within the two capacitors, which exchange energy slowly due to their large capacitances. Once the two capacitors are filled with energy, the energy retreats back into the inductor, and the cycle continues. This process maintains resonance within the system.

Materials Used

The CCPD-033X-25-161.1328 oscillator requires a few materials for its use: a transistor, an inductor, two capacitors, and a power source. The inductor can be made from a coil of wire wound around a ferromagnetic core, which acts to increase the inductance. The transistor should have a collector-to-emitter resistance of 25 ohms, and the capacitors should have a capacitance of 161.1328 picofarads.

Assembly Procedure

The assembly of the CCPD-033X-25-161.1328 oscillator is quite simple. First, the transistor should be connected to the inductor in series. Then, a capacitor should be connected to the ground and the base of the transistor. Finally, the power source can be connected to the inductor and the other capacitor. This completes the assembly of the system.

Operation

Once the CCPD-033X-25-161.1328 oscillator is assembled, its actual operation behaves much like any other Colpitts oscillator. As discussed before, the two capacitors exchange energy slowly via the inductor, maintaining a sustained resonance within the system. The frequency of the resonancecan be altered by either adjusting the value of the single inductor or substituting one of the capacitors.

Conclusion

In conclusion, the CCPD-033X-25-161.1328 oscillator is a simple and reliable device that is capable of sustaining oscillations within a system. It is designed primarily for oscillator applications and relies on the Colpitts topology for its operation. With a few components and an external power source, this oscillator can be used to impart resonance on a system.

The specific data is subject to PDF, and the above content is for reference