CD4086BNSRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD4086BNSRG4 is a high-speed CMOS logic circuit that offers configurable output functions. It is classified as being a multi-function, configurable logic circuit, falling into the more general category of logic gates and inverters. These types of digital components offer greater versatility of operations in digital circuits, compared to non-configurable logic circuits.

The CD4086BNSRG4 combines the functions of up to four logic gates. It features four independent 2-input logic gates, as well as a combined 4-input Exclusive-OR/NAND gate. It features low ON-state resistance and increased drive current, giving it greater performance compared to similar non-configurable circuits. Additionally, it offers greater noise immunity than similar non-configurable circuits.

One of the primary applications for this device is in digital-signal-processing (DSP) circuits. Its output functions and gate combinations can be configured to allow for complex logic signals. By using it in DSP circuits, it is possible to achieve improved accuracy with greater speed, due to its higher levels of performance compared to non-configurable logic gates. Additionally, it is often used for waveform-generation, DAC (digital-to-analog converters) and comparison applications.

The working principle of the CD4086BNSRG4 is based on CMOS technology. This technology allows for a small area of silicon to be used to carry out multiple logic operations, resulting in a high-density logic circuit. It is designed to operate on a supply voltage of 4.5V to 6V. It operates on a low-power-consuming standby mode, when there is no input signal at the inputs. It operates in three different modes: Operation, Standby and Reset.

In operation mode, the device can be set up to perform four logic operations - AND, OR, NAND and XOR. Input and output signals are active low. This means that all logic operations take place when the input is zero. In standby mode, the output is not active or enabled, allowing the device to save power in the absence of an input.

In the reset mode, the device is reset and the outputs are disabled, preparing the device for new operations. Multiplexer/Demultiplexers (MUXs/DEMUXs) in the CD4086BNSRG4 facilitates the configuration of the output to either logic operations or multiplexer functions. When the logic outputs are enabled, the voltage levels of logic “1” and logic “0” are determined by the supply voltage.

The CD4086BNSRG4 is ideal for digital signal processing circuits, it combines the functions of up to four logic gates, with increased drive current and lower ON-state resistance. It is also great for waveform-generation, DAC and comparison applications, as these require specific logic operations for their operation. It is also cost-effective and highly-versatile, due to its configurable output functions which further allows for complex logic functions.

The specific data is subject to PDF, and the above content is for reference