CD74HC138M96G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HC138M96G4 is part of the 74HC series of logic ICs manufactured by Texas Instruments. They are small-sized and consume less power than other similar circuits. The 78HC138M96G4 belongs to the group of Logic - Signal Switches, Multiplexers and Decoders, which perform high-speed circuit switching and decoding.

The 74HC138M96G4 is a high-speed CMOS logic device which acts as a multiplexer. It has three active-low outputs EN0, EN1 and EN2, used to enable the demultiplexing of the input signals onto its three output ports A, B and C. The multiplexer has eight data inputs which are usually connected to 8-bit data buses. The CD74HC138M96G4 can be used for switching and distributing digital signals such as video, audio or data between two or more circuits. It also has an active-low chip select input which can control the outputs directly, allowing for single or multiplexed operation.

The CD74HC138M96G4 operates in two modes, select and demultiplex. In select mode, the chip select CS input is used to select between a single set of output ports and multiple sets of output ports. In demultiplex mode, the chip select CS input is used to activate the demultiplexing of the input signals onto the three output ports. The CD74HC138M96G4 can also be used as a decoder in applications where the binary input codes are placed in a single register and output codes distributed across multiple registers.

The CD74HC138M96G4 is used in a wide range of applications, including data storage systems, communication networks and digital logic devices. In data storage systems, the CD74HC138M96G4 is used as a multiplexer/decoder for decoding and reading digital data from a storage device such as a hard drive. In communication networks, the CD74HC138M96G4 is used as a multiplexer/decoder for switching between different channels and transmitting digital data across a network. In digital logic devices, the CD74HC138M96G4 is used for decoding and distributing digital signals to their respective outputs.

The CD74HC138M96G4 is normally supplied with a voltage supply range of 2 to 6V and can operate over a temperature range of -55°C to +125°C. The output current rating is 15mA, which is sufficient for most logic applications. The CD74HC138M96G4 can be used in both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide Semiconductor) circuits.

In conclusion, the CD74HC138M96G4 is a versatile device which is suitable for multiplexing, decoding and switching digital signals. It is able to operate over a wide range of voltages and temperatures, and its output current rating is sufficient for most logic applications. This makes the CD74HC138M96G4 an ideal choice for use in logic circuits, data storage systems, communication networks and digital logic devices.

The specific data is subject to PDF, and the above content is for reference