CD74HC4024EG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

As a monolithic integrated circuit, the CD74HC4024EG4 device is a four-section double-vibrator counter. It has an extended operating frequency range of DC to 6.5 MHz, allowing it to be applied to a wide range of applications. The device has an output capability of 10V, allowing it to be interfaced with many other components.

The logic of the device consists of two sets of positive-edge triggered, concurrent-set clear, and J-K flip-flops. Each flip-flop can generate a clock pulse when the input is asserted. The device can remember its count of two clocks until reset with the synchronous Clear pin. The outputs of the four flip-flops are combined in a wired-OR logic configuration to create a single Binary-Coded Decimal (BCD) output.

The CD74HC4024EG4 device can be used as an up-counter, down-counter, or as a frequency divider. As an up-counter, it can count pulses applied to the input clock up to its maximum frequency. As a down-counter, it cyclically subtracts the pulses applied to the input clock until it counts down to zero. As a frequency divider, it divides the frequency of the clock applied to the input by the specified amount.

When used as an up-counter, the device begins counting from zero when the input clock is applied and continues counting until the maximum frequency is achieved. The outputs are encoded in binary-coded decimal format, which can then be decoded to individual BCD outputs or combined to create a single BCD output. When used as a down-counter and frequency divider, the device works in reverse. The device begins with a maximum count and cycles down until it reaches the reset or divides the input frequency by the preset amount.

The CD74HC4024EG4 is a robust, reliable device that can be used in a wide variety of applications. It is suitable for use in digital oscillators, frequency dividers, digital clocks and alarms, data transmission, and a variety of other digital applications. Its wide input range, extended operating frequency, and high-going outputs make it ideal for use in many low-power applications.

The design of the CD74HC4024EG4 is based on the principle that a change in input clock will cause a change in the output. This principle is used to create a stable output signal. The device is synchronized by positive-edge triggered flip-flops, which can remember the count of two clocks until reset. The outputs are encoded in binary-coded decimal format, which can then be decoded to individual BCD outputs or combined to create a single BCD output.

The CD74HC4024EG4 is a versatile device that can be used in a variety of design applications. Its extended frequency range and large output capability make it ideal for use in frequency dividers, digital clocks, and many other digital applications. Its simple logic and intuitive design make it ideal for use in a wide range of applications. With its low-power requirements, extended frequency range, high-going outputs and reliable performance, the CD74HC4024EG4 is a great choice for designing digital oscillators, frequency dividers, digital clocks and alarms, data transmission, and a variety of other digital projects.

The specific data is subject to PDF, and the above content is for reference