CD74HCT151ME4

Series:	74HCT
Packaging:	Tube
Part Status:	Active
Type:	Multiplexer
Circuit:	1 x 8:1
Independent Circuits:	1
Current - Output High, Low:	4mA, 4mA
Voltage Supply Source:	Single Supply
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	74HCT151

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to CD74HCT151ME4

The CD74HCT151ME4 is an 8-input multiplexer integrated circuit (IC) produced by Texas Instruments and is a member of the company\'s logic IC family. This IC is versatile and is equipped with multiple inputs and outputs. Consequently, it can be used in a wide range of applications. In this article, we will take a closer look at the application field of the CD74HCT151ME4 and its working principle.

Application Field of CD74HCT151ME4

The CD74HCT151ME4 is primarily used in semiconductor devices to demultiplex data signals with precision timing and low power consumption. One of the most common applications of the CD74HCT151ME4 is in digital communication systems, where the IC can be used to convert parallel data signals into serial information, or vice versa.The CD74HCT151ME4 can also be used in simple control systems. As an example, the IC can be used to control a motor driven in a certain direction. By writing specific values on certain pins of the CD74HCT151ME4, it is possible to determine which direction the motor will move.The CD74HCT151ME4 is also used in embedded systems, where it is used to set and control the in/output of the system. The IC can also be used in commercial and domestic applications, such as in consumer electronics and appliances. In these cases, the CD74HCT151ME4 is used to control the speed and direction of rotation of motors.

Working Principle of CD74HCT151ME4

The CD74HCT151ME4 is an 8-input multiplexer, meaning that it has a total of 8 inputs and 4 outputs. The inputs are identified as A, B, C, D, E, F, G, and H, and the outputs are labeled Y0, Y1, Y2 and Y3.The CD74HCT151ME4 uses an 8-way mux selector to provide the proper data routing. The selector is composed of 8 single-pole double-throw (SPDT) switches, each switch connected to one of the 8 input signals. The output lines correspond to the four output pins of the IC.When the control inputs (A to H) of the CD74HCT151ME4 are activated, the appropriate SPDT switch is closed and the corresponding input data is routed to the output lines. The output data is then sent out of the IC.The CD74HCT151ME4 also has an active low enable input ENABLE that must be set to a logic 1 (high) in order for the device to be fully operational. When ENABLE is set to 0 (low), the output lines are in a high-impedance state, in which case all of the data lines can be safely ignored.

Conclusion

The CD74HCT151ME4 is a versatile 8-input multiplexer IC that is widely used in digital communication systems, embedded systems, simple control systems, and commercial and domestic applications. The device is composed of 8 SPDT switches that allow the user to route input signals to the appropriate output and provides a low power consumption. The active low enable line must be set to logic 1 (high) in order for the IC to be operational.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description