CD74HCT191M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74HCT191M is a CMOS count timer integrated circuit, categorized as a logic device due to its ability to act as a counter, divider, and frequency detector. This integrated circuit is highly suitable for use in applications with wide supply voltage (VCC) ranging from 2V to 6V. This particular device boasts low power consumption, high noise immunity, and low propagation delay.

The CD74HCT191M is a device that operates on asynchronous logic. It has an internal counter of 4 bits and two nine-stage ripple counters, allowing it to effortlessly count to 1023 and divide it by values ranging from 2-1023. It also has a multiplexer that allows the user to choose between frequencies or divisions. This device has three outputs: QA, QB, and RC. QA and QB are the outputs of the first two integrated 4-bit counters, while RC is the output of the nine-stage ripple counter.

The device has two clock inputs, CK1 and CK2. CK1 is an input that records time pulses at a preset intervals. CK2 works as a divide-by-2 and generates other clock pulses. The maximum clock rate for CK1 is about 10 MHz, and for CK2, it gives about 5 MHz. When CK1 reaches 10 MHz, CK2 will automatically reset to 0, giving rise to the output of QA and QB when the counter sets to a count of 10.

One of the most notable features of the CD74HCT191M is the logic gating circuits that can be used to adjust the counting speed. A logic gating circuit consists of a two-stage RC (resistor/capacitor) oscillator and a pulse-width comparator. When the oscillator is triggered, it produces an output signal that is fed into the comparator. The comparator then compares the signal to the trigger, and if both signals match, it activates another circuit in the gating logic that increases the speed of the counter. This way, the frequency of the oscillator can be changed based on the output of the comparator.

The CD74HCT191M can also be used in applications where frequency measurement is needed. The device has a frequency detector with a frequency range of 0.5 to 10 Mhz. This works by taking the input signal and feeding it into a comparator, which then compares it to a predefined frequency. If the input signal matches the frequency, it will activate a timing circuit that produces an output pulse, which is then sent to the output. The frequency detector is highly useful for applications that require precise frequency measurements.

The CD74HCT191M is a highly versatile device and can be used in a variety of applications, ranging from frequency measurement to counting and dividing. Its low power consumption, wide supply voltage, and high noise immunity make it a suitable choice for commercial and industrial applications. The logic gating circuit and frequency detector also make this device a great choice for applications where precise measurements are required.

The specific data is subject to PDF, and the above content is for reference