CDS40 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Recent years, fuse technologies have seen rapid development. One of the most remarkable ones is CDS40 fuse. CDS40 fuse usually referred to as current limiting fuse (CLF), marked by its distinctive ability to limit the Let-Through Energy noted for its UL-compliant designs. CDS40 fuses are now widely used in various protection applications, especially in low-voltage applications below 600VAC.

The CDS40 series fuses offer superior current-limiting characteristics for medium- and low-voltage circuit protection applications. Their characteristic curve and power density ensure interrupting capability and operation of electrical systems from a wide range of voltages and currents with a minimum amount of physical size, ultimately improving safety and reliability. CDS40 fuses are applied in low-voltage power systems such as switchgear, motor control centers, disconnect switches, distribution systems, capacitor protection, and harmonic mitigation devices.

How does the CDS40 fuse work? The CDS40 fuse is a type of current limiting fuse (CLF). It is designed to react very quickly in short-circuit conditions and provide superior current ratings and interrupting capabilities coupled with low power consumption. When the current exceeds the fuse\'s rated limit, it quickly shuts off the circuit, thereby protecting the system from potential damage. The high-interrupt rating of CDS40 ensures that it can handle the high levels of short-circuit current without subjecting the protective device, its wires, and the joints to extreme loads. The CDS40 also offers a low-time-delay rating that allows the device to react faster to a short-circuit condition.

The CDS40 fuse contains a copper stinger and a vitreous-enameled fragment plate with an alumina ceramic body. The stinger is connected in series with the load, and the current passes through it and is monitored. When the current crosses the rated limit, the fragment plate positioned on the side of the stinger breaks into small fragments, reducing the current while providing a small final-clearing current as the system shuts down. As the contacts separate, an arc is created. The arcs over the contacts will develop until the system is completely shut off, allowing the current to reduce while keeping the temperature low and avoiding damage to the support system.

In addition to having current-limiting capabilities, the CDS40 fuse also offers a range of temperature ratings between -40°C to 85°C. Its sheath or casing is hermetically sealed and can effectively contain any arcing that may occur during a fault event and has a high resistance to short-circuit conditions. The design of the CDS40 fuse is relatively compact and can save on space when used in multiple applications. Moreover, this current-limiting fuse is easy to install and is maintenance-free.

In conclusion, the CDS40 fuse is a reliable solution for protecting low-voltage applications. It is used in a wide range of applications including capacitor protection, switchgear, motor control centers, disconnect switches, and distribution systems. CDS40 fuses have superior current-limiting characteristics and can reduce short-circuit currents quickly and safely without subjecting the protective device and its wires to extreme loads. They are also compact, maintenance-free, and easy to install. It is this combination of features that make the CDS40 fuse an important choice for reliable circuit protection.

The specific data is subject to PDF, and the above content is for reference