CDSCB10M7GA119-R0 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ceramic filters are a type of electronic bandpass filter that is created by utilizing ceramic material as the dielectric between two conducting plates. As an example of such a filter, the CDSCB10M7GA119-R0 is a miniature SMD 10-MHz ceramic bandpass filter with a bandwidth (passband) of 7 MHz. This component is capable of realizing very compact circuit boards while providing excellent general characteristics over a wide range of frequencies.

The CDSCB10M7GA119-R0 is best suited for various applications, including wireless communication, digital audio broadcasting, and high frequency communication. The component is designed with a variety of features that make it excellent for these and other similar applications, including high dielectric strength, high temperature capability, and superior insertion loss and passband ripple characteristics.

The actual working principle of the CDSCB10M7GA119-R0 can best be understood by examining its internal construction. The filter consists of an integrated ceramic element which is suspended between two thin gold plated ground planes. The center conductor connects the ceramic element to the center pin and creates an impedance transformation through the filter section. This impedance transformation, in turn, acts to enhance the frequency-dependent behavior of the filter.

These ceramic elements are then coupled to the external connection point through the two gold plated pins. In the CDSCB10M7GA119-R0, the pin spacing is 0.5 mm, which enables it to fit into most circuit boards. The internal construction and resulting input impedance of the filter are tailored to achieve the desired specification.

In use, the CDSCB10M7GA119-R0 is connected to the circuit board via the two gold plated pins. At 10 MHz, the filter will pass signals within the 7 MHz passband when the signal is centered on the 10 MHz carrier frequency. This allows the filter to be used to filter out unwanted RF interference and other noise that may be outside the desired passband.

The CDSCB10M7GA119-R0 is also designed with an input capacitance of only 6 pF to 10 pF. This low capacitance ensures that the total insertion loss over the passband is minimal. As a result, the filter can provide maximum signal fidelity and minimum insertion loss for even the most sensitive applications.

In addition to its excellent performance, the CDSCB10M7GA119-R0 also offers convenient installation. Due to its miniature size, it can be mounted in tight spaces. It also features a low profile, which makes it easy to install in high density applications. In addition, the filter is RoHS compliant and lead-free, making it a great choice for environmentally conscious designers.

Overall, the CDSCB10M7GA119-R0 is an excellent choice for various applications such as wireless communication, digital audio broadcasting, and high frequency communication. Its wide bandwidth, low insertion loss, and high temperature capability make it an ideal choice for designers who are looking for a robust solution. In addition, its low profile makes it easy to install, and its lead-free construction makes it environmentally friendly.

The specific data is subject to PDF, and the above content is for reference