CDV30FF911JO3F

Series:	CDV30
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	910pF
Tolerance:	±5%
Voltage - Rated:	1kV
Dielectric Material:	Mica
Operating Temperature:	-55°C ~ 125°C
Mounting Type:	Through Hole
Package / Case:	Radial
Lead Spacing:	--
Features:	General Purpose
Size / Dimension:	--
Height - Seated (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE CapacitorsThe CDV30FF911JO3F is a mica and PTFE capacitor. It combines two major construction materials in order to achieve a greater performance rating than each would alone. While both components are commonly used in power electronics, the combination creates a durable and highly reliable cap. The construction of the CDV30FF911JO3F consists of an aluminum top plate, a mica layer, a PTFE bottom plate, and aluminum vias. The aluminum layer on the top and bottom help keep the temperature of the capacitor low and isolated. The aluminum vias hold the mica plate and the PTFE plate together. The mica provides insulation between the top and bottom layers, while the PTFE layer provides flexibility. The application field of the CDV30FF911JO3F is extremely wide. The capacitor is suitable for single-phase and three-phase power supplies. It can also be used as a snubber capacitor for motor control applications, for start-up of motors, and for high frequency DC/DC converters. The capacitor has a good performance even under high inrush current. The working principle of the CDV30FF911JO3F is somewhat complex. It is a type of capacitor made up of multiple smaller capacitors connected in parallel. This increases the capacitance of the device and allows for a higher electrical charge or current to be stored in it. When a voltage is applied to the capacitor, the voltage and current supplied to the device by the application supply charge the capacitor up to a maximum voltage. The CDV30FF911JO3F is also a low loss capacitor. The aluminum top and bottom layers reduce heat generated in the capacitor and thus the dielectric losses are minimized. The combination of the mica and PTFE materials helps with the capacitance stability. The PTFE is able to absorb high frequencies without distortion, so the stability is maintained even when powered by high frequency signals. In conclusion, the CDV30FF911JO3F is a mica and PTFE capacitor with a multitude of applications. The combination of mica and PTFE materials makes for a durable and highly reliable cap. Its range of applications span from power supplies to motor controls, and its low loss and capacitance stability make it useful for high frequency signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description