CDV30FK102FO3F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE capacitors are used in a wide range of applications, from consumer electronics to power supplies. The type of capacitor that is used will depend upon the requirements of the application, and the CDV30FK102FO3F is a popular option. This capacitor is an example of a mica and use of PTFE (Polytetrafluoroethylene) in combination with mica for enhanced capacitance.

The CDV30FK102FO3F is designed for high temperature applications, with a maximum operating temperature of up to 150°C. It utilises a bleeder dielectric, which leads to a smaller size compared to conventional capacitors. The capacitor is also RoHS compliant and conforms to the Low Voltage Directive 73/23/EEC. The capacitor is constructed of mica dielectric with PTFE insulation and has an X7R dielectric, meaning that it is suitable for both high and low frequency applications, with an operating temperature range from -55°C to +150°C.

In terms of its application field, the CDV30FK102FO3F is popularly used in power supplies, DC and AC circuits, power conditioning, audio amplifiers, and radio receivers. It is also suitable for motor drives, sensor circuits, automotive electronics, and audio and video signal conditioning applications. The capacitor is available in various voltage ratings, ranging from 100V to 2000V, and it is available in various capacitance values from 0.1uF to 1000uF.

The working principle of the CDV30FK102FO3F is based on two electrodes which are separated by insulation in order to create a potential difference between them. This potential difference arises due to the previously stored charge, and when a circuit is connected to the two electrodes, current flows between them which causes the capacitor to charge and discharge as the potential difference changes. During the charging phase, the voltage across the capacitor increases while the current decreases. In the discharging phase, the voltage across the capacitor decreases while the current increases. This process repeats until the capacitor is fully charged and discharged.

To conclude, the CDV30FK102FO3F is a mica and PTFE capacitor which is designed for high temperature applications, and is suitable for use in power supplies, DC and AC circuits, power conditioning, audio amplifiers, and radio receivers. The capacitor works on the principle of two electrodes being separated by insulation in order to create a potential difference between them, and the current then flows between them as the potential difference changes, charging and discharging the capacitor until it reaches full capacity.

The specific data is subject to PDF, and the above content is for reference