CEGS6-1REC4-33157-4-V

Series:	CEG
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are devices that can prevent catastrophic voltage surges in a circuit and act as a fail-safe measure in case of electrical overload. The CEGS6-1REC4-33157-4-V is an example of a circuit breaker that can provide reliable protection of sensitive electrical equipment and systems. This article will discuss the application field and working principle of the CEGS6-1REC4-33157-4-V circuit breaker.

Application Field

The CEGS6-1REC4-33157-4-V circuit breaker is a high-voltage circuit breaker intended for use in industrial and commercial installations. It can be used to protect equipment connected to low and medium voltage distribution systems as well as for complete switchgear systems with L-L and L-N power supplies. It is also suitable for controlling short-circuit currents in radial and isolated feeder systems. The circuit breaker has been tested and certified under CAN/CSA-C22.2 No. 235-04 and CSA C22.2 No. 0-377-05 safety standards.

Working Principle

The CEGS6-1REC4-33157-4-V circuit breaker works by sensing an increase in current flowing through the circuit. When it detects an overload, it interrupts the connection between the power supply and the load by opening a set of contacts. This opens the circuit, stopping the flow of current. The circuit breaker will then reset automatically when the overloaded circuit has been cleared.The CEGS6-1REC4-33157-4-V circuit breaker features four primary operating modes that allow it to be used in a variety of applications. These include manual reset (MR), short-term overcurrent protection (TOR), long-term overcurrent protection (LOR), and selective start-stop (SSS). Manual reset requires an operator to physically reset the circuit breaker after an overload occurs. Short-term overcurrent protection will disconnect the power from the circuit if an overload is detected and then reset after a predetermined time period. Long-term overcurrent protection prevents continuous cycles of overloads by allowing only one reset before blocking the power supply. Finally, selective start-stop (SSS) mode will disconnect the power supply when an overload occurs, but only allow restarting of the circuit upon manual reset.

Conclusion

The CEGS6-1REC4-33157-4-V circuit breaker is a high-voltage circuit breaker that is suitable for a variety of applications such as low and medium voltage distribution systems and switchgear systems. It features four primary operating modes and has been tested and certified under CAN/CSA-C22.2 No. 235-04 and CSA C22.2 No 0-377-05 safety standards. It operates by disconnecting the power supply when an overload is detected and can either reset automatically or require manual reset.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description