CELBXPB11-35188-200-V

Series:	CEL
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	--
Number of Poles:	2
Actuator Type:	Rocker
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are an important part of the power system, and the safety and reliability of the power system depends on the circuit breaker. CELBXPB11-35188-200-V is a type of circuit breaker, and this article will discuss its application field and working principle. Application FieldCELBXPB11-35188-200-V is mainly used in the power system and suitable for AC distribution networks with rated voltage of 11KV, rated current up to 200A, 50Hz. It is suitable for medium and low voltage power distribution system using and protecting line failure and short circuit. Its feature is its low voltage switching off capacity, reducing the cost of large current air switch. It can be used in large shopping malls, high-end clubs, high-end residential areas, etc.Working PrincipleThe CELBXPB11-35188-200-V circuit breaker has an actuating device and a trip device in the control part. When the circuit breaker is operated, the trip device in the control part will open or close the circuit breaker contact after receiving a certain signal. When a fault occurs in the power system, the trip device in the control part will receive the fault signal and send the corresponding action signal to the actuator. The actuator acts together with the mechanism to make the circuit breakers quickly disconnect the fault point, which plays a role in blocking the fault current and protecting the power system.In addition, the CELBXPB11-35188-200-V circuit breaker is equipped with a total of four trips, which have Over Voltage (O/V), Over Current (O/C), Short Circuit (S/C) and Thermal Protection (T/P). The O/V function is used to protect the power system when the voltage is higher than the set point. The O/C function is used to protect the power system when the current exceeds the set point. The S/C function is used to protect the power system when the short-circuit current exceeds the set point. The T/P function is used to protect the power system from damage due to overheating, and it can also trip when the current is lower than the set point. In conclusion, CELBXPB11-35188-200-V circuit breaker is suitable for medium and low voltage power distribution system and can be used in large shopping malls, high-end clubs, high-end residential areas, etc. It has four trip functions, Over Voltage (O/V), Over Current (O/C), Short Circuit (S/C) and Thermal Protection (T/P), and its trip device can quickly disconnect the fault point, thus playing a role in blocking the fault current and protecting the power system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description